Clock Functions
Radio Control Operation
ON/OFF | To use |
Auto Reset |
While the alarm sounds, press ON/OFF once. The alarm stops and resets to go off at the same time tomorrow. If you do not turn off the alarm, it continues to sound for 30 minutes. Then it stops and resets to go off at the same time tomorrow.
ALARM
SET
To check | Press ALARM SET. The display shows the wake up time |
Alarm 1 | for Alarm 1. |
ALARM
SET | ALARM MODE |
To check | Simultaneously press both ALARM SET and ALARM MODE. |
Alarm 2 | The display shows the wake up time for Alarm 2. |
VOLUME
To set the volume of the alarm
For the radio (
), use the VOLUME buttons to set the volume.
For tone (
), choose the alarm sound (see page 12).
Set the alarm to go off. When the alarm sounds, press either VOLUME button to adjust the volume.
ON/OFF |
| Press ON/OFF to silence the alarm. This automatically resets | |
|
| the alarm to repeat tomorrow. |
|
|
|
|
|
| To snooze | When the alarm is in tone ( ) or radio ( | ) mode, press |
SLEEP/SNOOZE |
| SLEEP/SNOOZE to pause the alarm for ten minutes. | |
|
| When the alarm is in tone and radio ( | ) mode, press |
|
| SLEEP/SNOOZE to pause the tone and hear the radio. The | |
|
| tone sounds again in ten minutes. Press again to silence the | |
|
| radio. The alarm indicator flashes while paused. | |
|
|
| |
| To stop | Press ON/OFF once. The indicators remain lit. The alarm | |
ON/OFF | the alarm | repeats tomorrow. |
|
ALARM MODE
To disable | To turn off the alarm function, press ALARM MODE until |
Alarm 1 | the ( ) and ( ) indicators do not appear on the display. |
| The alarm must be reset for next use. |
ALARM
SET | ALARM MODE |
To disable Hold down ALARM SET and press ALARM MODE. Alarm 2
Alarm 2 flashes on the display. Release ALARM SET. Press ALARM MODE until the (
) and (
) indicators no longer appear.
ALARM
SET
PRESET STATIONS
To wake to | Simultaneously press ALARM SET and any PRESET button. |
your favorite | The preset indicator and the station frequency flash on the |
station | display. |
| Release the ALARM SET button. Alarm 1 plays this station |
| until you reset the alarm. |
| Alarm | Press ON/OFF to silence. Backup batteries run the alarm |
ON/OFF | operation | for approximately a week during power failure. To conserve |
during a | power, only the tone sounds, even if radio is selected. Normal | |
| power failure | operation resumes when power is restored. Batteries should |
|
| be replaced after an extended power failure. |
|
|
|
14 | January 4, 2002 | AM189930_01_V.pdf |