Installation Instructions, Prepare Location

Electrical Requirements

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

IMPORTANT: The hood must be electrically grounded in accordance with local codes and ordinances, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, latest edition, or Canadian Electrical Code, CSA C22.1

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park, Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, Ohio 44131-5575

■A 120-volt, 60-Hz, AC-only, 15-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this hood be provided.

■Do not ground to a gas pipe.

■Check with a qualified electrician if you are not sure range hood is properly grounded.

■Do not have a fuse in the neutral or ground circuit.

■The range hood must be connected with copper wire only.

■The range hood should be connected directly to the fused disconnect (or circuit breaker) box through flexible armored cable or flexible metallic conduit.

■Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70, latest edition, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91, latest edition, and all local codes and ordinances.

INSTALLATION INSTRUCTIONS

Prepare Location

■Do not cut a joist or stud unless absolutely necessary. If a joist or stud must be cut, then a supporting frame must be constructed.

■Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

■We recommend the hood be installed 30"–36" (76.2 cm – 94.1 cm) above the countertop.

■Check your ceiling height and the hood height maximum before you select your hood.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

1.If possible, disconnect and move freestanding or slide-in range from cabinet opening to provide easier access to rear wall. Otherwise put a thick, protective covering over countertop, cooktop or range to protect from damage or dirt.

2.Select a flat surface for assembling the unit. Cover that surface with a protective covering.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood. Failure to do so can result in back or other injury.

3.Using 2 or more people, lift range hood onto protective covering.

4.Determine and mark the centerline on the wall where the canopy hood will be installed.

5.Select a mounting height between 30" and 36" (76.2 cm and 94.1 cm) above the range to the bottom of the hood and mark reference line on the wall.

NOTE: For installation locations with reduced ceilings heights, the vent hood may be installed using the upper vent cover for both vented and non-vented (recirculating) installations.

9760266 specifications

The Whirlpool 9760266 is a sophisticated appliance designed to enhance the cooking experience in modern kitchens. This versatile microwave oven combines advanced technology with user-friendly features, making it an essential tool for any culinary enthusiast.

One of the standout features of the 9760266 is its sleek design, which seamlessly blends into any kitchen décor. With a stainless-steel finish, it not only offers durability but also adds a touch of elegance to the workspace. The compact size allows for easy installation while still providing ample interior capacity for various cooking tasks.

Equipped with innovative technology, the Whirlpool 9760266 utilizes Sensor Cooking. This feature intuitively adjusts cooking times based on the food's moisture level, ensuring perfect results every time. Whether you are reheating leftovers or cooking a meal from scratch, Sensor Cooking takes the guesswork out of the process, delivering optimal heating.

The microwave also boasts a powerful wattage, which facilitates quick and efficient cooking. With multiple power levels, users can customize the cooking intensity based on their specific needs, from gentle warming to rapid boiling. This flexibility makes the appliance ideal for a range of cooking techniques, including defrosting, steaming, and baking.

Another impressive feature is the combination of convection cooking and microwave capabilities. This dual functionality allows users to achieve not only speedy cooking but also the delicious, even browning associated with traditional ovens. The convection mode circulates hot air, enabling food to cook evenly, making it perfect for baking desserts or roasting meats.

The Whirlpool 9760266 also includes a variety of pre-programmed cooking options, allowing for simple one-touch operation. These presets take the uncertainty out of cooking times and temperatures for various dishes, ranging from popcorn to casseroles.

In terms of user convenience, the appliance has an easy-to-read digital display and intuitive buttons that guide users through the cooking process. The interior is designed for easy cleaning, with a non-stick coating that prevents food residue from sticking.

Safety features are also a priority with the Whirlpool 9760266. It includes a child lock option to prevent accidental usage, making it ideal for families with young children.

In summary, the Whirlpool 9760266 microwave oven combines style, power, and technology. Its efficient cooking capabilities, user-friendly interface, and advanced features make it a valuable addition to any kitchen, elevating the cooking experience to new heights.