Preparing Your Kettle
BEFORE FIRST USE: Remove any packaging material or stickers from your kettle.
1.Place the power base on a flat, stable surface.
2.Fill the kettle to the “Max” indicator on the water level window (2 quarts /
2 liters). (Fig. 1)
3.Ensure that the anti-scale filter is attached to lid. If it is not, then snap the anti-scale filter into place.
4.Snap the lid onto the lid hinge pins that are on either side of the kettle and lock the lid in place.
5.Place the kettle on the power base and press the On/Off button.
6.Set the variable temperature control to the highest temperature setting (210˚F) and let the water come to a boil until the kettle shuts off automatically. (Fig. 2)
7.Discard this water and repeat the process one more time.
8.Rinse the kettle two or three times. The kettle is now ready for use.
MAX
Level 
Fig. 1
Fig. 2 | Variable |
LED | Temperature |
Control |
Temperature | |
Display | |
Using Your Kettle
1.Lift the kettle off the base before filling.
2.Press the lid release button for easy filling. (Fig. 3)
Lid Release
Button
Fig. 3
3.Fill the kettle to the desired amount of water using the water level window as
your guide. Ensure that water is between the ‘MIN’ and ‘MAX’ levels.
CAUTION: Do not allow kettle to boil dry as this will cause damage to the kettle. WARNING: If the kettle is overfilled, there is a risk that water will spit out of spout.
4.Make sure that the lid is securely locked in place and that the kettle is seated correctly on the base.
5.The LED temperature display on the control panel will blink ‘OFF’ when the kettle is placed on the power base. Press the On/Off button to turn the unit “On”. The power “On” light will illuminate.
6.Turn the variable temperature control to the desired temperature, 80˚F to 210˚F or push it to set it directly to 210˚F. Once the temperature of the water has reached the set temperature, the unit will automatically shut off and the power “On” light will turn off.
7.If you wish to keep your water at the set temperature, press the temperature hold button. The temperature hold light will now illuminate. (Fig. 4)
Temperature
Hold
Button
Fig. 4 | Variable |
| Temperature |
| Control |
8.To stop the temperature hold feature, press the temperature hold button one more time and the temperature hold light will turn off.
9.To turn the unit “Off”, depress the On/Off button. The power “On” light will turn “Off”.
10.Remove the kettle from the power
base for convenient and easy serving. CAUTION: Do not place hot kettle directly onto furniture or flammable materials. Use a hot plate or cloth under the kettle when placing on a table, countertop or other furniture.
NOTE: The kettle will not turn on if the temperature of the water in the kettle is higher than the temperature selected.
11.After use, empty the kettle and ensure that the temperature hold is “Off”. The unit will automatically shut off when the set temperature of the water has been reached.
12.Unplug the power base from the electrical outlet.
Care and Maintenance of Your Kettle
WARNING: Always disconnect the appliance from the power source before cleaning. Never immerse the kettle or base in water or any other liquid.
It is necessary to clean your cordless kettle regularly to ensure optimum performance. Mineral deposits in tap water may cause the water level window and the inside of the kettle to discolor.
1.To remove build-up, fill the kettle with 1 part vinegar and 5 parts water and leave it unplugged overnight or for a period of approximately 8 hours. Do not use cordless kettle while descaling solution is inside.
2.After the period of soaking, empty the kettle. Due to the fact that a small amount of solution will be left in the kettle, it is necessary to rinse the kettle out with clean water 2 or 3 times. Your kettle is now ready for use.
3.The outside of the kettle can be wiped clean with a soft damp cloth.
NOTE: Never use any chemical, steel wool, or abrasive cleaners to clean any part of the kettle.
To Shorten Power Cord Length: Wrap the extra cord length around hidden cord storage until length is correct for base placement. Make sure that the cord has been properly wrapped and the base is seated firmly.
Don’ts
•Never use the cordless kettle for boiling or heating anything other than water.
•Never place any utensils, containers or baby bottles in unit.
•Never immerse unit or power base in water or any other liquid.
•Never let unit run dry.
•Never leave unit unattended when in use.
Do’s
•Use caution when pouring hot water.
•When boiling water for baby formula, always boil water to boiling point
(210˚F) and then let it cool. Follow the manufacturer’s instructions on how to prepare the baby formula.
•Always ensure that there is water in kettle before turning the unit on.
•Always use fresh water.
•Always unplug power base when unit is not in use.
•Rinse the anti-scale filter regularly.
•Hold kettle firmly when lifting from power base.
Hints & Tips
•Boil water for hot water bottles.
•Heat water for manicures and pedicures.
•Boil water for baby formulas.
•Warm water for warm compresses.
•Boil water for tea, coffee and instant soup broth.
