Kenwood IH100 manual Safety features, Care & cleaning, Power Time Level, Air entry and air vent

Page 5

To cancel timing during the count down, press the timer button. It will continue heating unless it is switched off.

safety features

The induction hob will turn off if it is not operated in two minutes.

In use, unless a suitable pan of at least 12cm diameter is used a beep will sound for approximately 1 minute. If an appropriate pan is not placed onto the surface in this time the induction hob automatically turns off.

If the appliance overheats or pans boil dry, the induction hob automatically enters a protective condition where its heating is then regulated. If the overheating continues, the appliance may display a protection code (see troubleshooting guide).

During use if there are problems with the mains supply, the induction hob automatically enters a protective state and displays a protection code. Unplug the appliance and wait for supply to return to normal (see troubleshooting guide).

If the induction hob is in operation and no button is pressed it has an automatic switch-off in accordance with the times in the table below, (except for when timing program exceeds 2 hours).

power

time

level

 

1, 2

4 hours

3, 4

3 hours

5, 6

2 hours

Once the pan is moved away the hob plate will stop heating.

care & cleaning

Switch off, unplug and allow the appliance to cool down completely before cleaning.

Never immerse the induction hob in water.

Hob plate, body and control panel:

Wipe with a soft damp cloth or non

– abrasive cleaner and dry thoroughly. Ensure all traces of cleaner are removed. Do not use abrasive or scouring detergents/powders, scouring pads or steel wool as they will damage or crack the hob plate or damage the control panel.

Dust, fat and liquids from food that has boiled over must be removed as soon as possible. If they are allowed to harden they become increasingly difficult to remove. Do not use a knife or other sharp utensil as these may damage the hob plate or control panel.

Air entry and air vent:

After long periods of use dirt and dust may accumulate in the air entry or air vent. Clean with a soft flexible brush. Never wash using water.

5

Image 5
Contents IH100 Important note medical implants SafetyBefore using your Kenwood appliance Important UK only Suitable cookwareBefore plugging Timer mode Using your induction hobBefore using your induction hob for the first time KeyCare & cleaning Safety featuresPower Time Level Hob plate, body and control panelGuarantee uk only Service and customer careYou supply your receipt to show when you bought it Spares and attachments call 0870 Other countriesProblems Suggestions Troubleshooting guide

IH100 specifications

The Kenwood IH100 is a cutting-edge induction hob designed to elevate the culinary experience in modern kitchens. Renowned for its sleek and stylish design, this induction hob not only complements contemporary kitchen aesthetics but also offers a plethora of innovative features that enhance cooking efficiency.

One of the standout characteristics of the Kenwood IH100 is its induction technology, which uses electromagnetic fields to heat pots and pans directly, rather than the hob surface. This results in faster heating times and precise temperature control, enabling users to quickly achieve the desired cooking results. The hob is capable of boiling water in mere minutes, making it an excellent choice for busy households or those who enjoy entertaining.

The Kenwood IH100 features a user-friendly control interface that allows for easy adjustments between different heat settings. With multiple power levels, cooks can simmer, sauté, and sear with finesse. The hob is also equipped with a timer function, allowing users to set cooking times for each dish, ensuring perfect results every time.

Safety is another key consideration in the design of the IH100. The induction technology means that the surface remains cool to the touch, significantly reducing the risk of burns during cooking. Additionally, the hob is equipped with automatic shut-off features that activate when cookware is removed, further enhancing safety in the kitchen.

Another impressive feature of the Kenwood IH100 is its compatibility with various cookware materials, such as cast iron, stainless steel, and enameled items, making it a versatile addition to any kitchen. It is designed with a sleek, easy-to-clean surface that resists spills and stains, simplifying the post-cooking clean-up process.

Energy efficiency is also a hallmark of the IH100. With its quick heating capabilities and reduced energy consumption compared to traditional gas or electric hobs, users can enjoy significant savings on their energy bills.

In conclusion, the Kenwood IH100 induction hob stands out as an innovative kitchen appliance that combines advanced technology with user-centric features. Its efficiency, safety measures, and elegant design make it an attractive option for anyone looking to modernize their cooking experience while enjoying the benefits of induction cooking.