Kenwood FP730 manual Maxi-blend canopy, Slicing/shredding discs, To use the cutting discs

￿maxi-blend canopy

	When blending liquids, use the maxi-blend	￿
	canopy with the knife blade. It allows you
	to increase the liquid processing capacity
	from 1 litre to 1.5 litres, prevents leaking
	and improves the chopping performance
	of the blade.
1	Fit the drive shaft and bowl onto the
	power unit.
2	Fit the knife blade.
3	Add ingredients to be processed.
4	Fit the canopy over the top of the blade
	ensuring it sits on the ledge inside the bowl	multipro
	. Do not push down on the

canopy, hold by the centre grip.

5 Fit the lid and switch on.

slicing/shredding discs
reversible slicing/shredding
discs - thick ￿, thin ￿
Use the shredding side for cheese,
carrots, potatoes and foods of a similar	￿
texture.
Use the slicing side for cheese, carrots,
potatoes, cabbage, cucumber,
courgette, beetroot and onions.
fine (Julienne style) chipper disc	￿

Use to cut: potatoes for Julienne style French fries; firm ingredients for salads, garnishes, casseroles and stir fries (eg carrot, swede, courgette, cucumber).

safety

●Never remove the lid until the cutting disc has completely stopped.

●Handle the cutting discs with care - they are extremely sharp

to use the cutting discs

1	Fit the drive shaft and bowl onto the
	power unit.
2	Holding by the centre grip	, place
	the disc onto the drive shaft with the
	appropriate side uppermost	.
3	Fit the lid.
4	Choose which size feed tube you
	want to use. The pusher contains a
	smaller feed tube for processing
	individual items or thin ingredients.
	To use the small feed tube - first put
	the large pusher inside the feed tube.		multi	pro
	To use the large feed tube - use both
	pushers together.
5	Put the food in the feed tube.
6	Switch on and push down evenly with the pusher - never put

your fingers in the feed tube.

hints

●Use fresh ingredients

●Don’t cut food too small. Fill the width of the large feed tube fairly full. This prevents the food from slipping sideways during processing. Alternatively use the small feed tube.

●When using the chipper disc, place ingredients horizontally.

●When slicing or shredding: food placed upright comes out shorter than food placed horizontally .

●There will always be a small amount of waste on the plate or in the bowl after processing.

multi pro multi pro

citrus press (if supplied)

Use the citrus press to squeeze

the juice from citrus fruits (eg ￿ oranges, lemons, limes and

grapefruits).￿

￿cone

￿sieve

to use the citrus press

1Fit the drive shaft and bowl onto the power unit.

2Fit the sieve into the bowl - ensuring the sieve handle is

locked into position directly over

		multi	pro
the bowl handle	.
3 Place the cone over the drive
shaft turning until it drops all the way down			.

4Cut the fruit in half. Then switch on and press the fruit onto the cone.

●The citrus press will not operate if the sieve is not

locked correctly.

5