Care and cleaning, Service and customer care

care and cleaning

●Before cleaning, always switch off, unplug and let everything cool.

●Never put your steamer base in water or let the cord or plug get wet.

cleaning the water tank

●Empty, then rinse out with warm water and dry.

●Wipe with a damp cloth, then dry. all other parts

●Wash, then dry.

●You can wash the plastic parts (excluding steamer base) on the top rack of your dishwasher on a low heat.

●For storage, stack the baskets one

inside the other, starting with the highest numbered basket and finishing with basket number 1 .

●Push excess cord into the back of the steamer.

●Descale after 7-10 uses, depending on how hard your water is. Descaling increases steam power

and helps your steamer last longer.

1Pour clear vinegar into the tank up to 'Max'. Don't use a descaler.

2Fit the drip tray, basket and lid.

3Plug in and set the timer for 20-25 minutes. Unplug if the vinegar overflows.

4Unplug and when the steamer is cool, pour away the vinegar and rinse out the tank several times with water. Wash the drip tray, basket and lid.

●If the cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer.

If you need help with:

●using your steamer

●servicing or repairs (in or out of guarantee)

call Kenwood Customer Care on

023 9239 2333. Have your model number ready - it's on the underside of your steamer.

Eire

●See our advertisement in Golden Pages.

other countries

●Contact the shop where you bought your steamer.

If your steamer goes wrong within one year from the date you bought it, we will repair or replace it free of charge provided:

●you have not misused, neglected or damaged it;

●it has not been modified (unless by Kenwood);

●it is not second-hand;

●it has not been used commercially;

●you have not fitted a plug incorrectly; and

●you supply your receipt to show when you bought it.

This guarantee does not affect your statutory rights.