Hobart manual Model 1612P Slicer, General

Page 2

Installation, Operation, and Care of

MODEL 1612P SLICER

SAVE THESE INSTRUCTIONS

GENERAL

The model 1612P Slicer is equipped with a Hobart-designed motor and features the exclusive Hobart Stay-Sharp cast solid stainless steel knife. The model 1612P is available for single-phase electrical service and is furnished with a cord and plug as standard equipment. The cast aluminum base on the 1612P is coated with a durable oxford gray finish.

Accessories available for the 1612P slicer include the following: The Low Carriage Fence clamps onto the carriage tray to limit product movement during slicing. The Tubular Food Chute can be used in place of the carriage tray to slice round items such as lettuce or pepperoni. The Deflector clips on the knife support underneath the blade to guide the sliced product as it falls away from the blade.

MODEL 1612P SLICER

– 2 –

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Model 1612P Slicer Model 1612P Slicer GeneralElectrical Clean Before Using InstallationAssembly UnpackingSlicing Model 1612P SafetyOperation Cleaning Maintenance Knife SharpeningGauge Plate Sharpener Thumb Screw Not Shown Wear Adjustment Lubrication
Top Page Image Contents