Hobart D300 manual Bowl Guard Fig, To rotate the Wire Cage Assembly to the rear

Page 10

Bowl Guard (Fig. 5)

The Wire Cage Assembly on the Bowl Guard can be rotated out-of-the-way to add ingredients or access the bowl and agitator.

To rotate the Wire Cage Assembly to the rear . . .

Push the Latch in to release the Centering Pin from the Centering Ramp. Note how the grooves on the nylon Retainers allow the Wire Cage to ride around the circular Ridge of the planetary Drip Cup. The Wire Cage can rotate 360°; left or right. When the Wire Cage returns to the front and center position, the Centering Pin is captured and held by the Centering Ramp, restricting rotation of the Wire Cage until the Latch is pressed again.

The Wire Cage must be in the front-center position for the mixer to operate.

To remove the Wire Cage Assembly for cleaning . . .

Lower the Bowl. Rotate the Wire Cage to the rear. Remove both Agitator and Bowl. Return the Wire Cage to the front.

While holding the Wire Cage securely with both hands, use your thumb to push down on the Black Release Knob. Lower and remove the Wire Cage. Wash it in a sink or dishwasher; rinse with clear water; and dry with a clean cloth.

The stainless steel Splash Guard can be wiped-off or washed easily with a cloth or sponge and warm soapy water. Rinse with clear water. Dry with a clean cloth.

To reinstall the Wire Cage Assembly . . .

Hold the Wire Cage so its top ring is positioned around the planetary Drip Cup with the grooves in both nylon Rear Retainers straddling the Ridge on the Drip Cup. Push-in the Front-Center Retainer until it stays in and so that it's grooves also straddle the Ridge on the Drip Cup. The Wire Cage is properly assembled when all three Retainers straddle the Ridge on the Drip Cup in the three opposed locations.

Rotate the Wire Cage out-of-the-way to install or remove the Agitator and Bowl or to add ingredients.

Return the Wire Cage to its front and center position to operate the mixer.

Wire Cage Rotated Left

Latch

Ridge On Drip Cup

 

 

Rear Retainer

Splash Guard

 

Front-Center

Centering Ramp

Retainer

Wire Cage Front-Center Position

Centering Pin

Black Release Knob

PL-40071-1

Fig. 5

– 10 –

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Tion Model D300 Mixer Unpacking InstallationModel D300 Mixers General LocationCheck Rotation Three-Phase Machines Only Electrical ConnectionELECTRO-MECHANICAL Timer Controls when equipped OperationUsing the Dial Timer to set the Mixing Time Programmable Timer Controller when equippedFor Continuous Mixing 0100 0100 Bowl Lift Handle Changing SpeedsMixing To reinstall the Wire Cage Assembly To rotate the Wire Cage Assembly to the rearTo remove the Wire Cage Assembly for cleaning Bowl Guard FigCleaning MaintenanceLubrication Bowl Lift TroubleshootingService Bowl Lift Slideways

D300 specifications

The Hobart D300 is a high-performance dough mixer that combines advanced technology with robust engineering to meet the demands of busy commercial kitchens. Designed for bakeries, pizzerias, and restaurants, the D300 is capable of handling large quantities of dough, making it an essential piece of equipment for any establishment focused on bread and pastry production.

One of the main features of the D300 is its powerful motor, which ensures a consistent mixing process. With a heavy-duty 3-horsepower motor, the mixer can easily handle up to 300 pounds of dough, providing the capacity needed for high-volume operations. This power enables the mixer to blend thick and heavy ingredients effortlessly, resulting in a well-mixed dough with optimal consistency.

The D300 is equipped with a unique planetary mixing action, which allows for thorough mixing while reducing the risk of dough overheating. This design ensures that all ingredients are incorporated evenly, whether it’s flour, water, yeast, or any other additives. The mixer also includes a variable speed control feature, giving operators the ability to adjust the mixing speed based on the specific requirements of their recipes.

Another key characteristic of the Hobart D300 is its durable construction. Built with a stainless steel bowl and a cast aluminum body, the mixer is designed to withstand the rigors of daily use. The stainless steel bowl not only provides a sleek appearance but also ensures easy cleaning and resistance to rust and corrosion. Additionally, the machine features a safety interlock system that prevents operation when the bowl is raised, enhancing user safety.

In terms of technology, the D300 is designed for ease of use. It features simple toggle switches for speed selection, making it accessible for all staff members, regardless of experience level. The mixer also has a large capacity bowl that can comfortably accommodate multiple batches, reducing the time spent transferring dough between containers.

The Hobart D300 is also easy to maintain, with readily accessible parts and straightforward cleaning procedures. This reliability and efficiency make it a favorite among operators who need a dependable mixer that can handle a diverse range of dough types and recipes.

In summary, the Hobart D300 dough mixer stands out due to its powerful motor, versatile mixing capabilities, durable construction, user-friendly design, and ease of maintenance. Whether used for making artisanal bread or high-volume pizza dough, the D300 is an essential tool for achieving consistent, high-quality results in any commercial kitchen.
Top Page Image Contents