Xantech PA1235 installation instructions Common Audio BUS

Page 3

In addition, this switch must be left in the MANUAL OFF (OUT) position to permit an external DC Control Voltage to power the PA1235 ON and OFF.

Refer to "REMOTE MASTER ON/OFF CONTROL" terminals, item #13.

NOTE: The PA1235 may also be powered ON/OFF with an external AC line switch into which the power cord of the PA1235 is plugged (such as the switched AC outlet of a preamp, timer, etc.).

For this type of operation, leave the POWER switch depressed to the MANUAL ON position.

4.Status LED Indicators. These indicators, one for each channel pair, provide the following status information:

a)They show Power ON/OFF and Standby ON/OFF conditions.

b)They flash Amber 5 times during power up, then turn steady Green when Power On Mute releases. On power down, they flash Amber once, then go off.

This action occurs whether the unit is powered ON and OFF by the POWER switch (item # 3) or by a DC voltage applied to the REMOTE MASTER ON/OFF CONTROL terminals (item #13). Be sure the rear panel master AC LINE ON/OFF Switch, item #17, is set to the ON (I) position for the above to occur.

c)They will go Off when the Standby OFF IR command is received. Sending a MUTE OFF command will restore operation. Also, LEDs blink with Volume action.

d)A Mute command will cause them to blink Green (Red if Volume is within 5 dB of Max-V). Mute is released when any other PA1235 command is sent.

e)Changing an IR Code Group will cause them to blink Amber, confirming the change has taken effect.

f)When the volume level is increased to a range within 5 dB of MAX-V, the LED color changes from Green to Red. NOTE: Red indicates that volume is approaching maximum --- not an indication of power output level.

5.Line Inputs. These RCA-type jacks are the audio inputs for each of the amplifier pairs. Connect them to the OUTPUT jacks of the driving preamp with good quality RCA-type patch cables. Note that the inputs are marked LEFT-1-RIGHT, LEFT-2-RIGHT, etc., signifying the stereo channel pairs. Both the LEFT and RIGHT jacks are also active when the MODE switch (item #7) is set to the MONO or BRIDGED mode.

6.COMMON BUS / LOCAL Switch. Switches the amplifier stereo pair inputs between the LOCAL (LEFT/RIGHT) jacks, item #5 and the COMMON AUDIO BUS (LEFT/RIGHT) jacks, item #8. In this way, each amplifier pair can be driven by separate zones or sources or from a common source via the

COMMON AUDIO BUS.

7.MODE Switch. Switches the amplifier pair between STEREO, MONO and BRIDGED modes.

In STEREO mode, the two amplifiers operate independently of each other for 35 Watts of output each, except IR control of Volume, Max-V, Mute, Standby OFF/ON and Balance functions is common to both.

In MONO mode, left and right input signals are summed internally for Mono output from each of the two amplifiers. Also, either the Left or Right (item #5) input may be used if the source is already a Mono signal.

In BRIDGED mode, the two amplifiers are bridged for a single channel of high power output (150 Watts @ 8 Ohms). Either the Left or Right input (item #5) may be used to drive the resultant single channel amplifier.

CAUTION: Be sure to have the POWER turned OFF when changing the position of this switch and when making the corresponding speaker connection changes (see also item #12, following).

 

 

 

®

 

 

 

 

PA1235

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Amplifiers & Preamplifiers

Page 2 Page 4
Image 3
Page 2 Page 4
Contents General Information Channel Power AmplifierRack Panel Handles PA1235 Panel and Feature DescriptionsCommon Audio BUS PA1235 Rear Panel Features and Functions See also Caution notes, Fig RC68+ or RC68 Programmer / Remote ControlApplicable RC68+ Button Descriptions Instant Volume Presets. These commands allow ranBe sure to set the RC68+ to the same number Installation Physical Location and MountingStereo Mode Connections Connecting the PA1235Speaker Phasing Bridged Mode ConnectionsBasic Common IR Bus System Dedicated Keypads and Remotes Typical ApplicationsRS41AV Connecting the Remote Master ON/OFF Control Terminals Using a DC Power Adapter as a Control VoltageBasic Dedicated IR System Non Dedicated Keypads and Remotes PA1235 PA1235 Front Panel LEDs do not light no sound Trouble ShootingLow level or no sound when operated without IR control Unit responds intermittently or not at all to IR commandsSpecifications

PA1235 specifications

The Xantech PA1235 is a cutting-edge multi-zone power amplifier designed for both residential and commercial audio applications. Renowned for its impressive performance and reliability, the PA1235 offers robust amplification for distributed audio systems, fulfilling various audio needs in different environments.

One of the main features of the PA1235 is its power handling capabilities. It delivers 35 watts per channel across six channels, ensuring that every zone in a multi-room setup receives adequate power for optimal sound quality. This makes it suitable for powering a variety of speaker types, from in-ceiling speakers to outdoor sound systems. Its architecture allows flexibility in system configuration, making it easy to distribute audio throughout a home or business.

The PA1235 employs advanced Class D amplification technology, which maximizes efficiency while reducing power consumption and heat generation. This not only makes the amplifier more environmentally friendly but also enhances longevity and reliability. The lightweight design of Class D amplifiers allows for easier installation, especially in complex multi-zone environments.

Another characteristic of the PA1235 is its multi-zone functionality. Users can easily assign audio sources to different zones, allowing for personalized control of audio in various spaces. This feature is particularly valuable in commercial settings, where different areas may require distinct audio content or volume levels. It offers seamless integration with existing automation systems, thanks to its compatibility with various control protocols, facilitating a user-friendly experience.

The amplifier also features adjustable gain controls for each channel, allowing users to fine-tune the audio output for different speaker types or acoustic environments. Additionally, the built-in protection circuitry ensures that both the amplifier and attached speakers are safeguarded from overload or short-circuit situations, thereby enhancing overall system durability.

With its combination of power, efficiency, and versatility, the Xantech PA1235 is an ideal choice for integrators and audiophiles alike. Whether used in home theaters, restaurant sound systems, or corporate audio solutions, it provides high-quality audio performance that meets the demands of modern audio requirements, making it a prominent player in the audio amplification market.
Top Page Image Contents