Introduction
Congratulations on the purchase of this quality product.
We trust that you will enjoy many years of trouble free use. Please read these instructions carefully before using the oven. This manual will provide you with information on how to operate and care for your product in order that you gain the maximum benefit from it.
Unpacking
•Please ensure that packaging material is disposed of in a responsible manner.
•Plastic bags should be cut up to prevent children playing with them and accidentally suffocating.
•Remove all packing from the oven cavity and position the accessories.
•If the appliance is damaged in any way, do not use it. Report the damage to your dealer, who will take the necessary corrective action.
Cupboard design
•Cooking appliances generate considerable heat. The layout and materials of the mount- ing cabinet should take account of the characteristics of the oven.
•Surfaces immediately adjacent to the oven should be able to withstand temperatures of up to 100°C without delaminating or discolouring.
•Because the oven vents through the handle, overhanging doors above the oven may be
subjected to heat as well as condensation if very moist foods are being cooked.
Electrical installation
This appliance must be earthed and the manufacturer and the seller do not accept responsibility for any damage due to incorrect installation or electrical connection.
•This appliance should not be connected through an earth leakage system. Refer to S.A.B.S. 0142.
•Support the oven in front of the aperture and make the electrical connection before in- stalling. This will ensure enough cable length for subsequent servicing.
Connection to the power supply
The connection must be carried out by a licensed electrician, who will ensure that the oven is correctly connected and safely earthed. The rated current is printed on the serial number label attached to the oven side trim.
The appliance must be connected to the mains through a double pole isolating switch which has a minimum clearance between the contacts of 3 mm. in both poles.
A means for disconnection must be provided in the fixed wiring.
Page 2