Making Toasted SANDWIChES, Create Insert

MAKING TOASTED SANDWIChES

The sandwich cage accessory will transform your toaster into a versatile sandwich toaster.

1 BuTTER BREAD

2 CREATE

3 INSERT

				EN
			H		N
		G	W		O
	U	G			T
	U				I
	L				N
	P				U
	N				U
CLEANING & CARE	N				S
	U				E
	U
ImPORTANT: ENSURE THE TOASTER IS UNPLUggED AND
ALLOwED TO FULLy COOL bEFORE STARTINg TO CLEAN.
1 ThE COvER	2 ThE CASTINGS

use medium sliced bread,	place your fillings between
lightly butter the OUT-	the unbuttered sides.
SIDE OF EACH SLICE.	DO NOT OVERFILL
	THE SANDwICH.
	place sandwich in cage.

Set ‘selector’ and starting from the left insert cage into the slots. push down until clamped tightly shut.

	EN	N
H
W
		O

AFTER EACH USE

Wipe the ‘stainless steel cover’ with a non-abrasive cloth. A stainless steel cleaner can be used to restore shine to the cover only, but do not use an aggressive cleaner or one that contains ammonia.

Wipe the aluminium end castings with a damp cloth. Do not use a chemical or abrasive cleaner.

4 TOAST

5 REST

6 SERvE	U	G	T
			I
			N
			N
	L
	P		U
	N		U
	N		S
	U		S
	U		E
			E

3 ThE CRuMB TRAY

4 ThE INTERNALS

Toast until the sandwich is golden. Setting 3 on the ‘timer’. Adjust for your bread type.

Allow to rest for a further minute inside the toaster to allow fillings to fully warm. If neon light remains illuminated after use immediately unplug the toaster & call the service centre.

Remove, cut and serve.

CAUTION: FILLINgS CAN bE HOT.

Empty the ‘crumb tray’ on a regular basis. Daily if being used in a commercial kitchen.

With the toaster unplugged use a SOFT bRUSH to clean inside your toaster, do not use a sharp or metal utensil! Crumbs should be carefully brushed off the elements using only a soft brush, the toaster can be turned upside down and excess crumbs be shaken out.