Jenn-Air LI3URB/W10274314C installation instructions Range Hood Care, Cleaning

Page 13

Operating the blower

The FAN SPEED buttons turn the fan on and control the fan speed and sound level for quiet operation. The speed can be changed anytime during fan operation by pressing the desired blower speed button.

The FAN OFF button turns the fan Off.

RANGE HOOD CARE

Cleaning

IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filters before operating hood.

Exterior Surfaces:

To avoid damage to the exterior surface, do not use steel wool or soap-filled scouring pads.

Always wipe dry to avoid water marks.

Cleaning Method:

Liquid detergent soap and water, or all-purpose cleanser

Wipe with damp soft cloth or nonabrasive sponge, then rinse with clean water and wipe dry.

Metal Grease Filter

1.Press in the bottom center of the glass cover to release the latch. Pull the bottom of the glass cover outward to gain access to the internal area of the vent hood.

2.Remove each filter by pulling the spring release handle and then pulling down the filter.

A

A. Spring release handle

3.Wash metal filters as needed in dishwasher or hot detergent solution.

4.Reinstall the filter by making sure the spring release handles are toward the front. Insert aluminum filter into upper track.

5.Push in spring release handle.

6.Push up on metal filter and release handle to latch into place.

7.Close the glass cover and press in bottom center to secure.

Non-Vented (recirculating) Installation Filters

The charcoal filter is not washable. It should last up to 6 months with normal use. Replace with Charcoal Filter Kit Number W10272068.

To replace charcoal filter:

1.Cover the grille that covers the blower motor with the charcoal filter so that the slots on the filter correspond to the pins on the sides of the motor protection grille.

A BC

A. Charcoal filter

B.Pins

C.Blower motor

2.Turn the charcoal filter clockwise to lock it.

3.Repeat steps 1-2 on the other filter.

Replacing a Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. To avoid damage or decreasing the life of the new bulb, do not touch bulb with bare fingers. Replace bulb, using tissue or wearing cotton gloves to handle bulb.

If new lights do not operate, make sure the lamps are inserted correctly before calling service.

1.Disconnect power.

2.Use a flat-blade screwdriver and gently pry the light cover loose.

3.Remove the lamp and replace with a 12-volt, 20-watt maximum, halogen lamp made for a G-4 base.

4.Replace the light cover.

5.Reconnect power.

13

Image 13
Contents LI3URB/W10274314C Mural Périmétrique DE 32 81,3 CMTable of Contents Range Hood SafetyImportant Safety Instructions Tools and Parts Installation RequirementsLocation Requirements Cold weather installations Cabinet DimensionsVenting Requirements Makeup airElectrical Requirements For non-vented recirculating installationsExample Vent System Calculating Vent System LengthRange Hood Mounting Screws Installation Installation InstructionsPrepare Location Complete PreparationConnect Vent System For Rear Venting Installation Only Install Range Hood Connect Vent System For vented installations onlyMake Electrical Connection Disconnect powerComplete Installation Install Vent CoversRange Hood USE Operating the lightRange Hood Care CleaningWiring Diagram Accessories Assistance or ServiceU.S.A CanadaThis limited warranty does not cover JENN-AIRMAJOR Appliance WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreImportantes Instructions DE Sécurité Exigences d’emplacement Exigences DinstallationOutils et pièces Dimensions du placard Dimensions du produitInstallation dans une région à climat froid Exigences concernant l’évacuationAir dappoint Installations sans décharge à lextérieur recyclageMéthodes d’évacuation Calcul de la longueur effective du circuit dévacuationPréparation de lemplacement Instructions DinstallationInstallation des vis de montage de la hotte Spécifications électriquesAchever la préparation Rebrancher la fiche du ventilateur Raccordement du circuit d’évacuation Installation de la hotteRaccordement électrique Achever l’installation Installation des cache-conduitsUtilisation DE LA Hotte Commandes de la hottePour faire fonctionner la lampe Utilisation du ventilateurNettoyage Entretien DE LA HotteSchéma DE Câblage ConnAccessoires Assistance OU ServiceAu Canada W10274314C La présente garantie limitée ne couvre pas

LI3URB/W10274314C, W10274314C specifications

The Jenn-Air W10274314C, also known as the LI3URB, is a sophisticated appliance that embodies modern cooking technology and user-friendly features. As part of Jenn-Air's esteemed line of kitchen products, this model is designed to enhance culinary experiences, making it a staple for both amateur cooks and experienced chefs.

One of the standout features of the Jenn-Air W10274314C is its impressive performance capability. This appliance is engineered to deliver precise temperature control, allowing for a more consistent cooking experience. It utilizes advanced technology to ensure that your dishes are cooked evenly, providing delicious results every time. The design includes multiple burner configurations, enabling users to prepare various dishes simultaneously while maintaining optimal heat levels.

Additionally, the LI3URB/W10274314C showcases a sleek, modern aesthetic that seamlessly blends into any kitchen décor. Its stainless steel finish not only adds a touch of elegance but also ensures durability and ease of cleaning. The appliance is equipped with a spacious cooking surface, making it ideal for family meals and entertaining guests.

Another notable characteristic is its exceptional safety features. The Jenn-Air W10274314C includes an automatic shut-off function, ensuring peace of mind when using the appliance. This innovative technology helps prevent overheating and reduces the risk of accidents in the kitchen.

Furthermore, the appliance boasts an intuitive control panel, making it easy to navigate through various settings. Users can select from a range of cooking modes and adjust the temperature with precision. The built-in timer is a useful addition, allowing you to focus on other tasks without the fear of overcooking.

The Jenn-Air LI3URB/W10274314C is also compatible with various cooking styles, from gas to induction heating, catering to diverse culinary preferences. Whether simmering sauces, searing meats, or steaming vegetables, this appliance handles it all with finesse.

In summary, the Jenn-Air W10274314C, LI3URB/W10274314C presents a blend of design, safety, and advanced cooking technology. Its features make it an excellent choice for anyone looking to elevate their cooking experience while enjoying the benefits of modern kitchen innovations.