Jenn-Air JSD2789HEB, JSD2789HEW Connecting the Water Supply, Select models, Materials Needed

Page 6

INSTALLATION

Connecting the Water Supply

(select models)

WARNING

To reduce risk of injury or death, follow basic precautions, including the following:

•Read all instructions before installing ice maker.

•Do not attempt installation if instructions are not understood or if they are beyond personal skill level.

•Observe all local codes and ordinances.

•Do not service ice maker unless specifically recommended in Use & Care Guide or published user-repair instructions.

•Disconnect power to refrigerator before installing ice maker.

•Water damage due to an improper water connection may cause mold/mildew growth. Clean up spills or leakage immediately.

CAUTION

To avoid property damage or possible injury, follow basic precautions, including the following:

•Consult a plumber to connect 1⁄4” O.D. copper tubing to household plumbing to assure compliance with local codes and ordinances.

•Confirm water pressure to water valve is between 35 and 100 pounds per square inch, 20 pounds per square inch without filter.

•Do not use a self-piercing, or 3⁄16” saddle valve. Both reduce water flow can become clogged over time, and may cause leaks if repair is attempted.

•Wait two to three hours before placing refrigerator into final position to check and correct any water leaks. Recheck for leaks after 24 hours.

•Verify the copper tubing under the sleeve is smooth and free from defects. Do not reuse an old sleeve.

Materials Needed

•1⁄4” outer diameter flexible copper tubing

•Shut-off valve (requires a 1⁄4” hole to be drilled into water supply line before valve attachment)

•Adjustable wrench

•1⁄4” hex nut driver

Note

•Add 8' to tubing length needed to reach water supply for creation of service loop.

1. Create service loop with copper

2' diameter

minimum

tubing (minimum 2' diameter).

 

Avoid kinks in the copper tubing

 

when bending the service loop.

 

Do not use plastic tubing.

 

2.

Remove plastic cap from water valve

 

inlet port.

 

3.

Place brass nut (A) and sleeve (B) on

 

copper tube end as illustrated. (Do not

 

use old sleeve.) Brass nut (A) and

 

 

sleeve (B) are provided

A

 

in the refrigerator Use

B

 

and Care guide packet.

 

4.

Place end of copper

 

 

tubing into water valve

 

 

inlet port. Shape tubing

 

slightly. Do not kink – so that tubing feeds straight into inlet port.

5. Slide brass nut over sleeve and screw nut into inlet port. Tighten nut with wrench.

IMPORTANT: Do not overtighten. Cross threading may occur.

6. Pull on tubing to confirm connection is

 

secure. Connect tubing to frame with

 

water tubing clamp (C) and turn on

 

water supply. Check for leaks and

 

correct if necessary. Continue to observe

 

the water supply connection for two to

C

three hours prior to moving the

 

refrigerator to its permanent location.

 

7. Monitor water connection for 24 hours. Correct leaks, if necessary.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents US E & CA R E GU I D E Important Safety Instructions What You Need to Know About Safety InstructionsRecognize Safety Symbols, Words, Labels Important Safety Instructions Measuring the Opening InstallationLocation Transporting Your RefrigeratorDoor and Hinge Removal Replacing the DoorsConnecting the Water Supply Select modelsMaterials Needed Handle Installation Front Mount HandleHandle Extensions select models Full-Length Aluminum HandlesEuro Handles Installing Front-Mounted Handles for Stainless Steel Removing Front-Mounted Handles for Stainless SteelLeveling BB aInitial Control Settings Temperature ControlsTouch Temperature Controls Adjusting the ControlsInitial Temperature Setting Adjusting the ControlTriple Cool Climate Control User Preferences Fresh Food Features ShelvesElevator Shelf select models Dairy Center Door StorageChillKeeper Door BucketsAccessories Storage DrawersFreezer Features Shelves and BasketsICE and Water Automatic Ice MakerOperating Instructions Select models Dispenser Light select models Dispenser FeaturesWater Dispenser Operation Dispenser PadDispenser Lock select models Control features vary by model Ice Dispenser OperationDispenser Control select models Express Fill Button select modelsWater Filter Installation select modelsInitial Installation Water Filter RemovalGeneral Use Conditions Performance DataCertificate Number Food Storage Tips Fresh Food StorageFrozen Food Storage Food Storage Chart Dairy ProductsVegetables Care and Cleaning Refrigerator Cleaning ChartRemoving Odors From Refrigerator Energy Saving TipsReplacing Light Bulbs Glass DoorsPreparing for Vacation Preparing to MoveUpon Your Return Sound Possible Cause Solution Operating SoundsTroubleshooting Possible Causes What to doTroubleshooting See Sabbath Mode Ice and WaterSee Ice Storage Bin Troubleshooting Page What is Not Covered By These Warranties Warranty & ServiceWarranty If You Need Service

JSD2789HEW, JSD2789HEB, JSD2789HES, 12842108 specifications

Jenn-Air, a brand renowned for its innovation and high-end appliances, presents its impressive side-by-side refrigerators: the models 12842108, JSD2789HES, JSD2789HEB, and JSD2789HEW. Each of these refrigerators embodies the brand's commitment to luxury and performance, offering a host of features that cater to modern culinary needs.

One of the standout features across these models is the smart storage system designed to enhance organization. Adjustable spill-proof shelves provide flexibility for taller items, while gallon door bins offer easy access to condiments and drinks. The clear bins and crisper drawers, designed to maintain optimal humidity for fruits and vegetables, ensure that food remains fresh longer.

The cooling technology integrated into these refrigerators features Dual Cooling System, which uses separate cooling systems for the refrigerator and freezer compartments. This design prevents the transfer of odors and maintains ideal humidity levels. Additionally, the adaptive defrost feature optimizes energy use by only running the defrost cycle when necessary.

In terms of convenience, the models are equipped with an ice and water dispenser located on the front door. This feature provides filtered ice and water, promoting healthier hydration while minimizing the need for bottled water. Moreover, the filtration system ensures that the water meets high-quality standards, enhancing both taste and safety.

Energy efficiency is another significant aspect of these Jenn-Air refrigerators. With ENERGY STAR certification, they are designed to consume less energy than standard appliances, translating to savings on utility bills while reducing environmental impact.

Aesthetic appeal is not overlooked; these models boast a sleek stainless steel finish that complements any kitchen décor. The integrated design provides a seamless appearance, enhancing modern interiors while optimizing space.

Additionally, the electronic controls and LED lighting provide ease of use and visibility, allowing you to access your favorite items with minimal effort. With thoughtful touches and advanced technologies, the Jenn-Air refrigerators 12842108, JSD2789HES, JSD2789HEB, and JSD2789HEW represent a perfect combination of style, performance, and innovation, making them an invaluable addition to any home. Whether you’re a cooking enthusiast or someone who values convenience, these models are designed to elevate your kitchen experience.
Top Page Image Contents