Wegener Communications 550 quick start Navigating OSD Menus

QUICK START GUIDE

OSD Menus

All menus are white text with a solid black background. Highlighted items display as black text on a white background. Figure 3 is a representation of the OSD Main Menu.

Figure 3: OSD Main Menu

	MAIN MENU
	Carrier Status
	Carrier Select
Software Version/ Serial No.			Highlighted text
	Signal Strength
	Serial	Port Select
	Audio	1 Settings
	Audio	2 Settings
Data PID Settings
		Exit

Navigating OSD Menus

Use the arrow and Enter buttons on the Unity 550’s front panel to navigate and edit the fields on the OSD menus. Selectable fields allow you to change the whole parameter from pre-determined options. Editable fields allow you to change each digit of the parameter.

NOTE: Once a field is updated, you must select Activate and Exit on the submenu and then press Enter to update the value of the field. Before pressing Enter, you may go back to any field and correct it prior to acceptance.

Table 4: Unity 550 Types of OSD Action Fields

Button		Actions
	Main Menu	Submenu	Edit Mode
Enter	selects submenu	goes to editable field	no action
right arrow	no action	goes to editable field	moves cursor to right
left arrow	no action	no action	moves cursor to left
up arrow	goes to previous	goes to previous submenu	increases value of
	submenu	item	highlighted item
down arrow	goes to next submenu	goes to next submenu item	decreases value of
			highlighted item

6 800072-02B www.wegener.com