Jenn-Air CVGX2423 manual Cooktop at a Glance, Setting the Controls, Burner Heat Settings

Page 5

Cooktop at a Glance

Your cooktop is equipped with two small and two large burners.

1

2

3

4

1.Left rearsurfaceburner( 10,500 BTUs).

2.Left front surfaceburner(6,500 BTUs).

3.Right rear surface burner (6,500 BTUs).

4.Right front surface burner (I 2,000 BTUs).

Setting the Controls

Your cooktop has sealed gas burners with automatic re- ignition. If the burner flame should go out, the system will automatically spark to reignite the burner.

1.Place a pan on the burner grate. (To preserve the grate finish, do not operate the burner without a pan on the grate to absorb the heat from the burner flame).

2.Push down the control knob and tur immediately counterclockwise to the desired setting. (Ignitor will spark and click, at any position, until there is a flame.)

Burner Heat Settings

The size and type of cookware will affect the heat setting. For information on cookware, refer to “Cooking Made Simple” booklet.

The controls offer flexibility in heat setting selection. An infinite number of settings exist between Hi and Lo. At the Hi setting, a detent can be felt. For all settings other than Hi, simply adjust your flame for best results.

The following suggested settings are provided asguidelines.

Hi:

To start foods cooking

(Jp+jq

 

quickly, to bring liquids to

on

 

a boil.

 

 

6-10:For browning of foods and (Med. rapid boil of large amounts Hi) of food.

4-5: For most frying, and slow (Med.) boil of large amounts of

food.

2-3: To continue cooking foods (Med. startedon higher settings.

Lo)

Lo: To keep foods warm and to melt butter or chocolate.

@xQhM...

+All ignitors will spark and click when any surface burner knob is turned on. However, only the selected burner will light.

+A properly adjusted burner with clean ports will light within a few seconds. The cone-shaped flame will be clear blue in color with a deeper blue inner core; there should be no trace of yellow in the flame. (With LP gas, some yellow in the flame is acceptable.)

If the burner flame is yellow, lifts off the ports or is noisy, the air/gas mixture may be incorrect. Contact a service technician to adjust.

+Match the pan size to the surface burner. The use of undersized pans will expose the flame.

+Do not allow large pansto extend over the control knobs. Heat trapped between large pans and the knobs could cause the knobs to become hot.

+Do not let the burner flame extend beyond the edge of the pan.

+Do not allow large pans to extend beyond the edge of the surface burner grates. Heat trapped between large pans and other surfaces could possibly cause surfaces to become hot to the touch or damage these areas.

To prevent damage to other surfaces when using a large pan, you may purchase a “Big Pot” Canning Grate (Model AG146) accessory. Contact your dealer or call l-800- JENN-AIR.

+Leave a minimum of 1 l/2” between the side of a pan and surrounding side surfaces,suchasacountertop backsplash or side walls. This will allow heat to escapeand prevent damage to the side surfaces.

Image 5
Contents Call Sys ternWhat to do if YOU Smell GAS For Future AssistanceGas leak More Keep all controls Off’ when unit is not in useRead before operating your cooktop Ducting Considerations SImportantCooktop at a Glance Setting the ControlsBurner Heat Settings Ventilation System Using Your CooktopOperating During Power Failure Cleaning Chart If You Need Service Care and CleaningSurface Burner Heads Bases If surface burner fails to light
Related manuals
Manual 8 pages 20.81 Kb

CVGX2423 specifications

The Jenn-Air CVGX2423 is a versatile and innovative appliance that redefines culinary experiences in modern kitchens. This high-performance gas cooktop epitomizes the brand's commitment to quality,style, and functionality, making it a coveted choice for both amateur cooks and professional chefs alike.

One of the standout features of the CVGX2423 is its powerful gas burners. With a total of five burners, including a unique dual-flame burner, this cooktop provides superior heat control and precise cooking capabilities. The dual-flame burner is designed to deliver up to 20,000 BTU of power, allowing for rapid boiling and searing, while the other burners provide a range of outputs to accommodate various cooking methods, from simmering delicate sauces to grilling meats.

The sleek, stainless steel design of the CVGX2423 not only adds a touch of elegance to any kitchen but also ensures durability and ease of cleaning. The cooktop is fitted with continuous cast-iron grates that offer excellent heat retention and stability, providing a sturdy platform for pots and pans. These grates have a matte black finish, enhancing the visual appeal of the appliance while seamlessly blending into modern kitchen aesthetics.

Another hallmark of the Jenn-Air CVGX2423 is its advanced technology. The cooktop features a touch-activated ignition system that ensures quick and efficient lighting of the burners. This innovative system significantly reduces the risk of accidental fires by only igniting the burners when touched. Additionally, the cooktop is equipped with a premium stainless steel control panel, designed for intuitive access to various cooking functions, making it simple for users to switch between settings and manage heat levels.

Safety is also a top priority with the CVGX2423. The cooktop incorporates flame-sensing technology that automatically shuts off the gas supply if the flame goes out unexpectedly, providing peace of mind while cooking. Furthermore, the appliance is designed with a seamless surface, minimizing gaps where spills and food debris can accumulate, simplifying the cleaning process and promoting overall hygiene.

In conclusion, the Jenn-Air CVGX2423 is a premium gas cooktop that combines powerful performance, advanced safety features, and a sophisticated design. With its range of cooking options and user-friendly technology, it stands out as an essential addition to any modern kitchen, catering to the needs of those who appreciate culinary excellence.