Kramer Electronics user manual Configuring a TP-114 XGA/HD Line Transmitter DA System

Page 8

Configuring a TP-114 XGA/HD Line Transmitter – DA System

Figure 2 and Table 2 define the TP-114underside panel:

Figure 2: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter (Underside Panel)

Table 2: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter (Underside Panel) Features

#	Feature	Function
1	VS Switch	Slide the switch up1 to change the VS polarity to NEGATIVE polarity2;
		slide the switch down to NORMAL to retain the polarity
2	HS Switch	Slide the switch up1 to change the HS polarity to NEGATIVE polarity2;
		slide the switch down to NORMAL to retain the polarity

5Configuring a TP-114 XGA/HD Line Transmitter – DA System

You can use the TP-114with four TP-120units 3 to configure a 1:4 XGA/HD DA/CAT 5 Transmitter system. This will let you transmit a computer graphics/HD signal to four displays via long line CAT 5 UTP cabling.

To connect the TP-114to four TP-120units, as the example in Figure 3 illustrates, do the following:

1 By default, both switches are set in the down position 2 Downgoing syncs

3 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at:

http://www.kramerelectronics.com

6	KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 8

Contents

Model Contents TablesIntroduction Getting StartedGetting Started Connect the inputs and outputs see sectionShielded Twisted Pair STP/Unshielded Twisted Pair UTP About the Power Connect FeatureOverview Recommendations for Achieving the Best Performance Your TP-114 14 XGA/HD DA/CAT 5 Transmitter 86 7Configuring a TP-114 XGA/HD Line Transmitter DA System Configuring a TP-114 XGA/HD Line Transmitter DA SystemTP-120 Display Technical Specifications Wiring the CAT 5 Line in / Line OUT RJ-45 ConnectorsOnly the first purchase customer may enforce this warranty 2900-000183 REV