Kramer Electronics TP-100 user manual Your XGA Line Transmitter and the XGA Line Receiver

Your XGA Line Transmitter and the XGA Line Receiver

4Your XGA Line Transmitter and the XGA Line Receiver

Figure 1, Table 1 and Table 2 define the TP-100:

Figure 1: TP-100 XGA Line Transmitter

Table 1: Front Panel TP-100 XGA Line Transmitter Features

#	Feature	Function
1	POWER Switch	Illuminated switch supplying power to the unit
2	Out 2 EQ. Knob	Adjusts the equalization control level (EQ.) for the CAT5 Line 2 output
3	Out 1 EQ. Knob	Adjusts the equalization control level (EQ.) for the CAT5 Line 1 output

Table 2: Rear Panel TP-100 XGA Line Transmitter Features

#	Feature	Function
1	XGA Input HD15 Connector	Connects to the video source
2	ID Bit (OFF / ON) Button	Pushing in selects the ID BIT (when outputting a VGA signal from a
		laptop to an external VGA monitor1); releasing deactivates the ID BIT
3	Term (Hi-Z /75Ω) Button	Pushing in selects 75Ω; releasing selects Hi-Z2
4	XGA Loop HD15 Connector	For looping to a VGA acceptor
5	Line 1 OUT CAT5 Connector	Connects to the Line IN connector on the TP-200XGA Line Receiver3
6	Line 2 OUT CAT5 Connector	Connects to the Line IN connector on the TP-200XGA Line Receiver3
7	Power Connector with FUSE	AC connector enabling power supply to the unit

1 Sometimes laptop computers refuse to output a VGA signal to an external VGA monitor. By setting the ID Bit to ON (and using pin # 4 on the VGA connector that is normally unused), the laptop computer will output to an external VGA monitor

2 For looping select Hi-Z

3 Using a UTP cable with CAT5 connectors at both ends

3