Kramer Electronics tp-145 user manual Only the first purchase customer may enforce this warranty

Page 14

LIMITED WARRANTY

Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms.

HOW LONG IS THE WARRANTY

Labor and parts are warranted for seven years from the date of the first customer purchase.

WHO IS PROTECTED?

Only the first purchase customer may enforce this warranty.

WHAT IS COVERED AND WHAT IS NOT COVERED

Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty:

1.Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site www.kramerelectronics.com.

2.Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID IF TAMPERED sticker has been torn, reattached, removed or otherwise interfered with.

3.Damage, deterioration or malfunction resulting from:

i)Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature

ii)Product modification, or failure to follow instructions supplied with the product

iii)Repair or attempted repair by anyone not authorized by Kramer

iv)Any shipment of the product (claims must be presented to the carrier)

v)Removal or installation of the product

vi)Any other cause, which does not relate to a product defect

vii)Cartons, equipment enclosures, cables or accessories used in conjunction with the product

WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR

We will pay labor and material expenses for covered items. We will not pay for the following:

1.Removal or installations charges.

2.Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the responsibility of the Kramer dealer from whom the product was purchased.

3.Shipping charges.

HOW YOU CAN GET WARRANTY SERVICE

1.To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.

2.Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and a description of the problem(s).

3.For the name of the nearest Kramer authorized service center, consult your authorized dealer.

LIMITATION OF IMPLIED WARRANTIES

All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.

EXCLUSION OF DAMAGES

The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for:

1.Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss; or:

2.Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.

NOTE:All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.

This equipment has been tested to determine compliance with the requirements of:

EN-50081: "Electromagnetic compatibility (EMC); generic emission standard.

Part 1: Residential, commercial and light industry"

EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard. Part 1: Residential, commercial and light industry environment".

CFR-47: FCC* Rules and Regulations: Part 15: “Radio frequency devices Subpart B Unintentional radiators”

CAUTION!

Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment.

Use the supplied DC power supply to feed power to the machine.

Please use recommended interconnection cables to connect the machine to other components. * FCC and CE approved using STPcable (for twisted pair products)

12

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 14
Contents Models Contents TablesTP-145 or TP-146 IntroductionGetting Started YKPS OverviewQuick Start Shielded Twisted Pair/Unshielded Twisted Pair Defining the EdidDefining the TP-145 XGA/Audio/Data Line Transmitter Defining the TP-145/TP-146Recommendations for Achieving the Best Performance Feature Function Defining the TP-146 UXGA/Audio/Data Line ReceiverDefine the TP-146UXGA/Audio/Data Line Receiver Connecting the TP-145 and the TP-146 Internal Polarity and Sync Mode SwitchesAs defined in and Table Wiring the Twisted Pair RJ-45 Connectors Transmitting via RS-232To capture the Edid information from a display device To load the default EdidAcquiring the Edid Technical Specifications Lists the technical specifications of the TP-145and TP-146Only the first purchase customer may enforce this warranty PF d

tp-145 specifications

Kramer Electronics is synonymous with high-quality audio-visual products, and their TP-145 model stands out as a noteworthy solution for signal extension and transmission. The TP-145 is primarily designed as a twisted pair transmitter that allows for the seamless transfer of HDMI signals over a long distance. This capability makes it an ideal choice for professional AV installations where maintaining signal integrity and quality is crucial.

One of the standout features of the TP-145 is its ability to support resolutions up to 4K at 60Hz, ensuring that users can enjoy ultra-high-definition video output. This makes the TP-145 particularly appealing for environments such as conference rooms, educational institutions, and event spaces, where high-quality visuals are essential for presentations and demonstrations.

To facilitate easy integration into various setups, the TP-145 employs both HDMI and balanced twisted pair (UTP) transmission technology. This allows users to connect their HDMI sources to a compatible display device without the hassle of complex wiring or additional converters. The device supports distances of up to 70 meters (230 feet) when using CAT6a cables, providing flexibility in installation setups and making it viable for larger spaces.

The TP-145 also features advanced color depth support, which extends to 4:4:4 chroma subsampling, ensuring that colors remain vibrant and true to life over long cable runs. Additionally, the product is equipped with HDMI audio extraction capabilities, allowing users to extract audio signals separately, a particularly useful feature in scenarios where sound systems require different audio pathways.

Another critical characteristic of the TP-145 is its robust build quality designed to withstand the rigors of professional environments. It features a compact form factor that allows for easy mounting configurations, whether on racks or directly on surfaces. Furthermore, the user-friendly design includes LED indicators which provide real-time feedback on signal status, simplifying troubleshooting and installation processes.

In conclusion, the Kramer Electronics TP-145 combines cutting-edge technology with practical features, making it a top choice for professionals in need of reliable HDMI signal transmission solutions. With its exceptional performance capabilities, versatility in installation, and durable design, it stands as a reliable solution for any AV application.