Avanti PIM25SS Care and Maintenance, Getting Ice from the Ice-bin, οƒ˜ Cleaning Your Ice Maker

Page 11

Getting Ice from the Ice-bin

•Pull the ice bin forward and remove.

•Remove the amount of ice as desired and close by inserting the ice-bin back into the unit.

CARE AND MAINTENANCE

Caution

Failure to unplug the ice maker could result in electrical shock or personal injury.

Cleaning Your Ice Maker

•To ensure the cleanliness of the ice cubes, water in the reservoir should be replaced every 24 hours.

•Remove the drain plug to drain remaining water from the water reservoir when the ice maker will not be used for long period of time. Screw the drain plug back in place after the water has been drained.

•Always change with fresh water before starting ice production at initial installation or after long shut-off periods.

•Please clean your Ice maker regularly. When cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and vinegar to clean the inside and the outside surface of the Ice maker. Do not spray Ice maker with chemicals or diluted agents such as acids, gasoline or oil. Rinse thoroughly before starting.

Space Requirements

•During transportation, the incline angle of the cabinet should not be over 45°

•Do not turn the Ice maker upside down. Problems could occur in the compressor and sealed system.

•The Ice maker should be placed horizontally on a properly leveled surface.

•To ensure proper ventilation for your Ice maker allow 6” of space at the top, the back and on each side.

•Before using the Ice maker for the first time, please wait 2 hours after positioning it.

•Clean the inner liner, ice-bin, water box, water cup frequently.

IMPORTANT: Do not install the Ice maker near an oven, radiator, or other heat source.

Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your ice maker if you minimize the number of times the ice-bin is opened. If the power is going to be OFF for a longer period of time, you need to take the proper steps to disconnect your appliance.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents ICE MAKER/MAQUINA DE Hacer Hielo Table of Contents Your Safety and the Safety of Others are Very Important ICE Maker SafetyImportant Safeguides Help us help you… Parts and Features  Installation Of Your Ice Maker Important Safety InstructionsInstallation Instructions  Before Using Your Ice Maker Extension cord  Electrical connectionIce Size Operating Your ICE MakerStart StopStarting your Ice maker Getting Ice from the Ice-bin Care and Maintenance Cleaning Your Ice Maker  Power FailureProblem Possible Cause Suggested Solutions Problems with Your ICE MAKER?Troubleshooting Guide Avanti Products Customer Services Service For Your Ice MakerYour Avanti Products Warranty Antes de usar su Máquina de Hacer Hielo Medidas DE Precaucion ImportantesInstrucciones DE Instalacion ADVERTENCIA Cable de Extensión  Conexión EléctricaIce Size / Tamaño del hielo Operando SU Máquina DE Hacer HieloStart / Inicio Stop / PararIniciando el proceso con su máquina de hacer hielo  Limpiando su máquina de hacer hielo Cuidado Y MantenimientoSacando hielo del contenedor de hielo  Requerimientos de espacio Problemas CON SU Máquina DE Hacer HIELO?Guia Para Resolver Problemas Problema Causa Posible SugerenciasAvanti Registration Form Registration Information Protect Your Product  Promote Better Products

PIM25SS specifications

The Avanti PIM25SS is a compact, efficient, and stylish countertop ice maker that's perfect for a variety of settings including homes, offices, and outdoor gatherings. With its modern stainless steel finish, it not only delivers functionality but also complements any kitchen decor. This appliance stands out in its category due to several key features and technologies that enhance its performance and user experience.

One of the main features of the Avanti PIM25SS is its ability to produce ice quickly. The machine can make up to 28 pounds of bullet-shaped ice cubes in a 24-hour period, ensuring that you never run out of ice during parties or family gatherings. In just a few short minutes, it can create a batch of ice, providing immediate availability for any drink or cooling needs.

The PIM25SS boasts an intuitive control panel that simplifies the ice-making process. Users can easily operate the machine with a simple push of a button, and an LED indicator lets you know when the ice bin is full or when it’s time to refill the water reservoir. This indicator reduces the worry of overfilling and enhances convenience.

In terms of technology, the Avanti PIM25SS incorporates a powerful compressor that not only ensures efficient ice production but also works quietly, making it suitable for both indoor and outdoor use. The machine runs on a low energy consumption system, which is beneficial for the environment and helps keep energy bills in check.

The design of the Avanti PIM25SS features a large water reservoir that can hold up to 2.2 liters, allowing for extended ice-making sessions without frequent refills. Additionally, the compact size of the appliance means it can fit on most countertops without taking up too much space, making it perfect for those with limited kitchen space.

Constructed with durable materials and designed for easy cleaning, the Avanti PIM25SS is both functional and convenient. The removable ice bin and the easy-to-drain water reservoir facilitate hassle-free maintenance and cleaning.

In summary, the Avanti PIM25SS combines efficiency, style, and user-friendly features into a compact ice maker that caters to the needs of various environments. With its rapid ice production, advanced technology, and thoughtful design, it offers a great solution for anyone in need of a reliable ice-making appliance.
Top Page Image Contents