Important Safety Instructions

WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

Read all instructions before using the refrigerator.

DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous. . . even if they will “just sit in the garage a few days.”

Before you throw away your old refrigerator: Take off the doors. Leave the shelves in place so that children may not easily climb inside.

Never allow children to operate, play with, or crawl inside the refrigerator.

Never clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion.

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

Before Using Your Unit

Remove the exterior and interior packing.

Check to be sure you have all of the following parts:

1 Water Drip Tray

1 Ice Cube Tray

2 Glass Shelves (1 Full size / 1 Half size)

1 Instruction Manual

Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Installing Your Unit

This appliance is designed to be free standing only, and should not be recessed or built-in.

Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To level your unit, adjust the leveling legs at the bottom of the unit.

Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to cool the compressor and condenser.

Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

Avoid locating the unit in moist areas.

Plug the unit into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the refrigerator compartment.

RM4120W, RM4121B specifications

The Avanti RM4120W and RM4121B are compact refrigerator models designed to combine efficient cooling with stylish aesthetics, catering to various consumer needs. These refrigerators stand out due to their unique design, offering functionality without occupying excessive space, making them suitable for apartments, dorms, or as additional units in homes.

The RM4120W model features a classic white exterior, while the RM4121B is presented in a sleek black finish, appealing to different tastes and home décor styles. Both models share comparable dimensions, ensuring they fit snugly in tight spaces without sacrificing storage capacity.

A highlight of these models is their versatile storage solutions. The refrigerators come equipped with adjustable shelves, allowing users to customize their layout according to their specific needs. Additionally, they include door bins, which can hold various condiments and beverages, maximizing the storage options available. The internal layout is designed to make accessing items easy and efficient, regardless of the arrangement.

One of the impressive features of the Avanti RM4120W and RM4121B is their energy efficiency. Both models are designed to operate quietly while consuming minimal energy, which not only saves on electricity bills but also makes them environmentally friendly. Advanced cooling technologies ensure that food and beverages are kept at optimal temperatures without excessive energy use.

The adjustable temperature control allows users to set their desired cooling levels, providing flexibility depending on what is stored. This feature is complemented by the automatic defrost function, which simplifies maintenance by preventing ice build-up and ensuring that the unit operates smoothly.

Additionally, both models incorporate a reversible door feature, enhancing their usability. This function allows the door to be installed to open from either side, making it easier to fit into various kitchen layouts or available spaces.

In summary, the Avanti RM4120W and RM4121B offer a blend of style, efficiency, and convenience. Their compact size, dual design options, adjustable storage, energy-saving capabilities, and user-friendly features make them an ideal choice for anyone in need of an effective refrigeration solution that complements their lifestyle and space requirements. Whether for personal use or as additional storage, these models deliver on performance and aesthetic appeal.