Avanti FF433PS, FF432W instruction manual Installation Instructions,  Before Using Your Appliance

Page 7

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when using your refrigerator -freezer, follow these basic precautions:

Read all instructions before using the refrigerator-freezer.

DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerator-freezers are still dangerous. . . even if they will “just sit in the garage a few days.”

Before you throw away your old refrigerator-freezer: Take off the doors. Leave the shelves in place so that children may not easily climb inside.

Never allow children to operate, play with, or crawl inside the refrigerator-freezer.

Never clean refrigerator-freezer parts with flammable fluids. The fumes can create a fire hazard or explosion.

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator-freezer. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

Before Using Your Appliance

Remove the exterior and interior packing.

Check to be sure you have all of the following parts:

Refrigerator Section

Freezer Section

2

– Wire Shelves

1 – Plastic Shelf

1

– Crisper

 

1

– Glass Crisper Lid

 

2

– Can Dispenser Door Bins

 

3

– Door Bins

 

Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Installation of Your Appliance

Place your refrigerator-freezer on a floor that is strong enough to support the refrigerator- freezer when it is fully loaded. To level your refrigerator-freezer, adjust the leveling legs at the bottom of unit.

Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to cool the compressor and condenser.

Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the refrigerator- freezer not to perform properly.

Avoid locating the unit in moist areas.

Plug the unit into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

7

Image 7
Contents Model Numbers / Nos. de Modelos Manual DE InstruccionesTable of Contents Your safety and the safety of others are very important Refrigerator SafetyImportant Safeguides Read this guide carefully Avanti Customer ServiceIf YOU Need Service Help US Help YOUParts and Features  Before Using Your Appliance Installation Instructions Installation of Your Appliance Warning Refrigerator Freezer  Temperature Control Panels Setting the Temperature Control Operating Your ApplianceCare and Maintenance  Reversing the Door Swing of Your Appliance Troubleshooting GuideProblem Possible Cause  Energy Saving TipsWiring Diagram Service for Your ApplianceYour Avanti Products Warranty Left Blank Intenionally Instalación de su electrodoméstico Instrucciones EN EspañolInstrucciones Para LA Instalación Antes de usar su equipo Cable de Extensión  Conexión EléctricaCompartimiento de su congelador Refrigerador CongeladorComo graduar la temperatura Cuidados EN LOS Periodos DE AusenciaCuidado Y Mantenimiento How Did You Learn About This Product Registration Information Promote better products Is This Product UsedVer

FF433PS, FF432W specifications

The Avanti FF432W and FF433PS represent a leap forward in compact refrigerator design, delivering efficient cooling solutions without compromising on style or functionality. Both models showcase the brand's commitment to innovation, making them ideal choices for small living spaces, dorm rooms, or office environments.

One of the remarkable features of the FF432W is its adjustable thermostat, which allows users to effortlessly set their desired temperature for both the refrigerator and freezer compartments. This flexibility ensures that a variety of foods and beverages are kept at the optimal temperature for freshness. The interior is thoughtfully designed with removable shelves, providing users the option to customize the space according to their storage needs. This adaptability makes it easy to accommodate larger items or bulk purchases.

The FF433PS model sets itself apart with its sleek and stylish stainless steel finish that lends a modern aesthetic to any room. It includes a reversible door, facilitating installation in any space regardless of layout. This feature is particularly beneficial for users with limited options for positioning their appliance. Both fridges are equipped with energy-efficient LED lighting, which not only illuminates the interior but also reduces energy consumption.

One of the standout technologies used in these models is the energy-efficient compressor system. This system not only contributes to quieter operation but also helps to maintain optimal energy consumption, aligning with sustainable living practices. Additionally, both units come with a built-in ice cube tray, enhancing convenience for users who enjoy chilled beverages.

Safety and convenience are also priorities in these models. The door shelving provides additional storage for cans, bottles, and condiments, ensuring organized access to frequently used items. The adjustable feet ensure stability on uneven surfaces, contributing to overall usability. The FF432W and FF433PS are designed to meet the demands of modern lifestyles, combining efficiency with aesthetic appeal.

Overall, the Avanti FF432W and FF433PS are versatile and stylish options for anyone in need of a compact refrigerator solution. Their innovative features, thoughtful design, and emphasis on energy efficiency make them ideal choices for those looking to maximize storage in limited spaces while maintaining an eye for modern design.