HOW TO SET THE OVEN CONTROLS
AUDIBLE SIGNALS
DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
SETTING THE CLOCK
1.Touch CLOCK pad. This is a 12 hour clock.
2.Touch CLOCK pad once more. This is a 24 hour clock.
3.Use the number pads to enter the correct time. If you selected 12 hour clock system, the digital clock allows you to set from 1:00 to 12:59. If you selected 24 hour clock system, the digital clock allows you to set from 0:00 to 23:59.You must touch at least three numbers to set the clock (one for hour and two for minutes).
4.Touch CLOCK pad again.
NOTE: When the oven is first plugged in or when power resumes after a power interruption, the display will show “HR 12”. If you prefer to not have the clock displayed, touch RESET.
You can check the clock time while cooking is in progress by touching the CLOCK pad.
SETTING THE OVEN TIMER
1.Touch TIMER.
2.Enter the amount of time by touching the number pads. Digit time is in minutes and seconds and set left to right. Set one digit (a 5 for 5 seconds) or up to four digits (2405 for 24 minutes, 5 seconds).
3.Touch START/STOP.
NOTE: Time countdown can be seen in display for 3 seconds before clock or cooking time is returned to display.
Touch TIMER and then touch RESET to cancel TIMER during timing process.
SETTING A COOKING PROGRAM
A. One-stage Cooking
1.Use the number pads to set a cooking time. You can set a cooking time from one second to 99 minutes and 99 seconds.
2.If you want to set a power level other than 100% power, touch POWER, then use the number pads to enter the power level. You can set the power level from 1 to 9.
Use single digits to set a cooking power level:
Number pad | Cooking power |
9 | 90% |
8 | 80% |
7 | 70% |
6 | 60% |
5 | 50% |
4 | 40% |
3 | 30% |
220%
110%
3.Touch START/STOP to start cooking.
B. Multi-stage Cooking
You can program oven for 4 cooking stages. Each stage can be programmed with a different power level and time. To program
NOTE:
After stage 1 time has elapsed, one beep sound, signaling the beginning of stage 2. After total time has elapsed, 4 beeps sound and END appears in display. Touch RESET pad or open oven door to clear END before starting another cooking function.
17