STOP/CLEAR: Touch to cancel the selected power level, cook or defrost times previously programmed. The time of day clock is not cancelled.
START/+30SEC BUTTON Touch to start the defrost or cook programs. The cook indicator light and the oven light will come on and the cooling fan will operate.
NOTE: END OF OPERATION- Display will show “0”.
•Three beeps will sound, the cook indicator light will go out and will show “0” on display window until the door is opened and the time of day will return to the display window. The oven light and cooking fan will turn off.
NOTE: TO INTERRUPT OPERATION
•The oven immediately stops.
•If no further cooking is required, touch the STOP/CLEAR BUTTON.
•To continue cooking, close the oven door and touch the START/+30SEC BUTTON. The oven will restart.
HOW TO SET THE OVEN CONTROLS
AUDIBLE SIGNALS
DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
SETTING THE CLOCK
1.Touch CLOCK pad. This is a 12 hour clock.
2.Touch CLOCK pad again for 24 hour clock.
3.Use the number pads to enter the correct time. If you selected 12 hour clock system, the digital clock allows you to set from 1:00 to 12:59. You must touch at least three numbers to set the clock (one for hour and two for minutes).
4.Touch CLOCK pad again.
NOTE: When the oven is first plugged in or when power resumes after a power interruption, the display will show a flashing “ :0 ”. If you prefer to not have the clock displayed, press and hold the CLOCK button for 3 seconds.
You can check the clock time while cooking is in progress by touching the CLOCK pad.
13