Avanti T-18 specification

PREPARANDO SU HORNO TOSTADOR

Si usted está usando su horno tostador por primera vez, por favor asegúrese de: Quitar todas las etiquetas de la superficie de su tostador.

Abra la puerta del tostador y saque los documentos impresos y papeles del interior del horno tostador. Limpie la rejilla, charola y bandeja con agua caliente y una pequeña cantidad de detergente líquido para lavar platos, utilice una esponja suave y no abrasiva. No sumerja el horno tostador en el agua.

Seque completamente la unidad antes de utilizarla.

AVISO

ANTES DE USAR LA UNIDAD POR PRIMERA VEZ. LOS ELEMENTOS CALENTADORES TIENEN UNA CAPA PROTECTIVA QUE NECESITA SER QUEMADA ANTES DE USAR EL HORNO.

PARA REMOVER LA CAPA PROTECTIVA:

ABRA LA PUERTA.

GIRE LA PERILLA DE CONTROL DE TEMPERATURA A 250ºC/480ºF.

GIRE LA PERILLA DE CONTROL DE TIEMPO A 15 MINUTOS.

USTED SENTIRA UN OLOR A QUEMADO, ESTO ES NORMAL.

ASEGURESE TENER VENTILACION ADECUAD A MIENTRAS HAGA ESTE PROCESO.

Seleccione un lugar para colocar el horno tostador. El lugar debe ser una área abierta sobre un mostrador con superficie plana donde el enchufe tenga alcance a una toma de corriente.

Enchufe el cable en un tomacorriente de 120 voltios / 60 ciclos.

CALENTAMIENTO PREVIO DEL HORNO

Coloque la parrilla en la posición deseada antes de calentar el horno tostador. Gire la perilla de control de temperatura y colóquela en la temperatura deseada. Gire la perilla selectora en la función deseada.

Gire la perilla del reloj a la posición que aproxima 15 MINUTOS.

PARA USAR LA FUNCION DE CALENTAMIENTO (WARM)

Nota: La función de calentamiento es para calentar o mantener los alimentos calientes después de haber sido cocinados.

Seleccione la posición deseada de la parrilla.

Gire la perilla selectora de función en la posición de calentamiento o “WARM”. Gire la perilla del reloj hacia el tiempo deseado. Los elementos calentadores se encenderán y apagarán alternadamente para mantener la temperatura.

Coloque los alimentos sobre la rejilla metálica o dentro de la charola para hornear.

Cuando se haya completado el calentamiento, abra la puerta completamente y saque los alimentos cuidadosamente.

T-18 specifications

The Avanti T-18, introduced in the mid-1960s, represents a significant milestone in the evolution of light sport aircraft. This remarkable aircraft was designed by the renowned aviation engineer and entrepreneur, Charles "Chuck" Kearns, who sought to provide an affordable yet high-performance option for general aviation enthusiasts. The T-18 is widely recognized for its exceptional aerodynamic design, built to maximize efficiency, speed, and handling.

One of the standout features of the Avanti T-18 is its sleek, all-metal construction, which includes a monocoque fuselage and a cantilever wing design. This design choice not only contributes to the overall robustness of the aircraft but also enhances aerodynamic performance. With a wingspan of 30 feet, the T-18 boasts a low drag profile that allows for impressive cruise speeds, typically ranging between 160 to 180 knots, depending on the specific variant and configuration.

Beneath the striking exterior lies a powerful engine that enables the T-18 to reach its speed potential. Most models are equipped with a four-cylinder Lycoming engine, delivering a power output of approximately 160 to 180 horsepower. This engine produces an excellent thrust-to-weight ratio, allowing for quick takeoffs and efficient climbs. Furthermore, the aircraft's lightweight structure contributes to its outstanding fuel efficiency, making it an economical choice for both recreational and cross-country flying.

Control and handling were vital considerations in the T-18's design, making it an excellent choice for pilots of varying experience levels. The aircraft features a conventional tail configuration that provides excellent stability and responsiveness. Its control surfaces are designed to give pilots a crisp, direct feel during all phases of flight, enhancing overall pilot confidence.

The cockpit of the Avanti T-18 is designed with pilot ergonomics in mind, providing a spacious environment equipped with essential controls and instrumentation. Many owners customize their cockpits with modern avionics packages, enhancing situational awareness and navigation capabilities.

In conclusion, the Avanti T-18 epitomizes the spirit of light sport aviation, combining cutting-edge aerodynamics, a robust engine, and user-friendly controls, making it a fantastic choice for pilots seeking performance and value. Its place in aviation history is secure as one of the iconic light aircraft that continues to capture the imagination of flying enthusiasts worldwide, proving that passion for flight endures through innovative design.