Avanti WDTZ000 instruction manual Problems with Your Water DISPENSER?, Problem Possible Cause

Page 10

PROBLEMS WITH YOUR WATER DISPENSER?

You can solve many common water dispenser problems easily, saving you the cost of a possible service call. Try the suggestions outlined below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

PROBLEM

 

POSSIBLE CAUSE

Water dispenser does not operate.

Not plugged in.

 

The circuit breaker tripped or a blown fuse.

Water cooler is not cold enough.

Check to be sure the cold switch on the back is ON.

 

The water dispenser does not have the correct

 

clearances.

 

Cooling coils at the back of the unit need to be cleaned.

Water dispenser hot water is not hot enough.

Check to be sure the hot switch on the back is ON.

 

Thermostat may be tripped. Contact Customer Service

 

for additional instructions.

Compressor turns on and off frequently.

The room temperature is hotter than normal.

 

The water dispenser does not have the correct

 

clearances.

Vibrations.

Check to assure that the water dispenser is level.

The water dispenser seems to make too much

The rattling noise may come from the flow of the

noise.

refrigerant, which is normal.

 

 

As each cycle ends, you may hear gurgling sounds

 

caused by the flow of refrigerant in your water dispenser.

 

Contraction and expansion of the inside walls may

 

cause popping and crackling noises.

 

The water dispenser is not level.

Bottle feels warm.

The water system is overfilled. Dispense Cold water until

 

air is released into the bottle.

Water bottle is hot.

Water is boiling in the hot tank and bubbling up into the

 

bottle. Press the hot dispenser button until water flows to

 

remove air from the hot tank.

Water Leaks

•

Over filling the ZeroWater Bottle Kit:

 

 

- Only add enough water to fill the bottom

 

 

chamber up to the “MAX” fill line.

 

•

Float Valve is sticking or improperly installed:

 

 

- To reset the valve simply lift the bottles until the

 

 

valve clears the water level and replace the

 

 

bottles back into the water intake area.

 

 

- If the valve is still leaking, check to ensure it is

 

 

securely attached as instructed.

O-Ring Seals (Filters)

O-Rings are not installed properly or missing. Check

 

each of the 3 locations

 

Adapter connection to top tank (1)

 

Filter connection to adapter (2)

Water not Reading “000”

•O-Rings are not installed properly or missing or leaking.

 

Check each of the 3 locations

 

 

Adapter connection to top tank (1)

 

 

Filter connection to adapter (2)

 

• Filters need replacing.

 

• Dispenser needs cleaning.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents WDTZ000 Table of Contents If YOU Need Service Help US Help YOUParts and Features Important Safety Instructions Installation Guidelines Extension Cord  Electrical Connection Surge Protector Operation Instructions HOT Water Faucet has a CHILD-SAFETY Guard Attachment Operating Your Water DispenserCare and Maintenance Taking Dispenser OUT of ServiceProblems with Your Water DISPENSER? Problem Possible CauseService for Your Water Dispenser Avanti Products Customer ServicesYour Avanti Products Warranty Instrucciones EN Español Antes DE EnchufarloPara Obtener Agua Caliente MantenimientoRegistration Information WDTZ000 Measure and Taste the Difference 000 Safety Precautions Proper InstallationPlease read before first use Directions for Removing the Splash GuardRecycling USE and Care Instructions Before Installing Cartridge First USE AssemblyInstallation of Filter Cartridges Using Your Filter Bottle with a StandardFilling the Filter Bottle with TAP Water Patented Ion Exchange Filter Replacement Filter Cartridges Filter Cartridge LifeAlways Change Filter Cartridge When TDS Meter Reads Understanding the TDS MeterReplacement Filter Cartridge Warranty Mida Y Pruebe LA Diferencia Precauciones DE Seguridad Instalacion CorrectaPor favor lea antes del primer uso Direcciones Para Remover EL Protector Contra SalpicadurasReciclando Attn Recycling ProgramUSE and Care Ensamblaje Instalacion DE LOS Cartuchos DEL Filtro Desenchufe el Dispensador de AguaLlenando SU Botellon CON Filtro Zerowater CON Agua DE Grifo Precauciones DE SeguridadFiltro de Intercambio de Iones Patentado Tiempo DE Vida DE LOS Cartuchos DEL Filtro Reemplazando LOS Cartuchos DE FiltroGuia DE Resolucion DE Problemas Usando EL Medidor TDS Garantia DEL Cartucho DEL Filtro DE Reemplazo USE and Care

WDTZ000 specifications

The Avanti WDTZ000 is a state-of-the-art washing machine designed to meet the demands of modern households. Classed as a front-load washer, it combines innovative technology with an intuitive user experience, making laundry day more efficient and effective.

One of the standout features of the Avanti WDTZ000 is its impressive capacity. With a generous drum size, it can handle large loads, which is ideal for families or those who prefer doing fewer, larger laundry batches. This not only saves time but also conserves water and energy.

In terms of technology, the Avanti WDTZ000 is equipped with a digital display and a range of cycle options. Users can choose from various wash cycles, including delicate, normal, heavy-duty, and quick wash, enabling customization to suit any fabric type or level of soiling. Additionally, the machine offers multiple temperature settings, ensuring optimal cleaning results without compromising on the integrity of the garments.

Energy efficiency is another hallmark of the Avanti WDTZ000. The model is designed to minimize water and energy consumption, adhering to eco-friendly standards. Its high-efficiency motor is durable and reduces noise during operation, making it suitable for homes where silence is appreciated.

The Avanti WDTZ000 also features advanced spin technology that enhances drying efficiency. The high spin speed extracts more moisture from clothes, reducing drying time and energy usage in the dryer. This is a great advantage for users looking to cut down on their electricity bills while ensuring their laundry is dried to perfection.

Additional characteristics include a stainless-steel drum, which is resistant to rust and ensures longevity. The control panel is user-friendly, with clearly labeled buttons and settings, making it accessible for everyone, regardless of their familiarity with washing machines.

Besides its functional aspects, the design of the Avanti WDTZ000 is modern and sleek, enabling it to blend seamlessly into any laundry room décor. Its compact size makes it suitable for apartments or homes with limited space, without sacrificing performance or capacity.

Overall, the Avanti WDTZ000 represents a blend of efficiency, functionality, and design, making it an excellent choice for users who want a reliable washing machine that meets their laundry needs with ease and sophistication.
Top Page Image Contents