Important Safety Instructions

?WARNING?

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

?Read all instructions before using the Wine Chiller.

?DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

?Before you throw away your old Wine Chiller: Take off the door. Leave the shelves in place so that children may not easily climb inside.

?Never allow children to operate, play with, or crawl inside the appliance.

?Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

?Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

?Do not repair or replace any part of the refrigerator or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user- repair instructions. Replace the fuse with the same type.

-Save these instructions-

INSTALLATION INSTRUCTIONS

?Before Using Your Wine Chiller

?Remove the exterior and interior packing.

?Check to be sure you have all of the following parts:

?3 Shelves

?1 Instruction Manual

?Clean the interior surface with lukewarm water using a soft cloth.

?Installation of Your Wine Chiller

?This appliance is designed to be free standing installation only, and should not be recessed or built-in (Fully recessed).

?Place your Wine Chiller on a floor that is strong enough to support it when it is fully loaded.

?Allow 5 inches of space between the back and sides of the refrigerator, which allows the proper air circulation to cool the heat sink.

?Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

?This refrigerator uses thermoelectric refrigeration technology (no compressor) and is not designed for storage in hot areas like garages, warehouses or outdoors since it is designed to operate at a maximum of 30 degrees below the ambient temperature.

?Avoid locating the unit in moist areas.

?Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

?After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing any items in the compartment.

EWC16B specifications

The Avanti EWC16B is a compact and efficient cooling solution designed to meet the needs of modern consumers seeking reliability and versatility in their home or office settings. This mini fridge is distinguished by its sleek and compact design, allowing it to fit effortlessly into various environments, from kitchens and dorm rooms to offices and workshops.

One of the standout features of the Avanti EWC16B is its generous capacity, which provides ample storage space for beverages, snacks, and perishable goods. With a total interior capacity of approximately 1.6 cu. ft., users can comfortably store a variety of items, including bottles, cans, and small food items. The adjustable shelving system adds to its practicality, allowing users to customize the layout to accommodate taller bottles or larger containers.

The temperature control system is another impressive aspect of the Avanti EWC16B. It is equipped with an adjustable thermostat that allows users to set the ideal temperature for their specific storage needs. This feature ensures that food and drinks remain fresh and at the optimal temperature, enhancing overall usability.

Energy efficiency is another key characteristic of the Avanti EWC16B. This model is designed with energy-saving technologies, making it an environmentally-friendly choice that helps reduce electricity bills without compromising performance. Its compact size also contributes to lower energy consumption compared to larger models, making it an ideal choice for those conscious of their ecological footprint.

The Avanti EWC16B additionally features a reversible door, providing flexibility in installation. Users can choose to open the door from either the left or right side, accommodating various kitchen configurations and personal preferences. This thoughtful design feature enhances the unit’s usability in tight spaces.

Moreover, the exterior of the fridge is designed for easy cleaning and maintenance, featuring a smooth surface that resists smudges and fingerprints. This convenience adds to the overall user experience, ensuring the fridge remains visually appealing in any setting.

With its combination of compact design, adjustable features, and energy efficiency, the Avanti EWC16B is a solid choice for anyone in need of reliable cooling in a limited space, making it a practical addition to any home or office environment.