Braun MC 200 TYPE 4177 PLUS, MC 100 Specifications, Safety fuse, Description, Switch, Assembly

English

Read all instructions carefully before using this product.

Important

●the blade 5 is very sharp! Take hold of the blade

by the plastic knob only. After using the blade, always take it out of the workig bowl 4 first, before removing the processed food.

●Your voltage must correspond to the voltage printed on the bottom of the appliance. Connect to alter- nating current only.

●Keep the appliance out of the reach of children.

●This appliance was constructed for household use only to process the listed quantities.

●None of the parts (including the working bowl) are microwave-proof. These parts should not be washed in the dishwasher either.

●Braun electric appliances meet applicable safety standards. Repairs on electrical appliances must only be done by authorized service personnel.

Faulty, unqualified repair work may cause accidents or injury to the user.

●The mains cable of this appliance can only be changed by an official Service Dealer, since it requires a special tool.

Specifications

●Voltage/wattage: See typeplate on the bottom of the appliance.

●Opeating time and max. capacity: See processing instructions.

This product conforms to the radio interference supression requirements as laid down by the Council Directive 82/499 EEC or 87/308 EEC.

Safety fuse

This unit is equipped with a self protecting system which prevents damage to the motor in the case of accidental overload and/or blockages. In those cases the unit will automatically stop. Turn the appliance off and leave for two minutes.

Afterwards, turn the appliance on again and continue the operation. If the motor will not start, it has not cooled off sufficiently. Turn the unit off again and wait long enough for the motor to cool off thoroughly. Store the appliance after use only after having turned it off, or pull the plug out of the socket.

Description

1Motor base

2 Switch

3 MC 200 only: Speed selector

4 Working bowl

5 Blade

6 Feed tube

7 Lid

8 Lid lock

9 Guide opening

jCentral shaft

k Pusher

l Slicing insert m Shredding insert n Carrier disc

o a MC 200 only: Deflector

o b MC 200 only: Beater disc p Cord storage compartment

Switch 2

0= off I = on

L = pulsator setting

For safety reasons, the motor turns on only if the lid 7 has been locked properly (see «Assembly»).

Assembly

Place the working bowl 4 on the central shaft j. Ensure that the guide opening 9 on the working bowl is aligned with the notches on the motor base. Turn the working bowl slightly in the direction of the arrow until it latches (A). (The lid lock 8 must slide into the opening at the top of the motor base.)

●When using the blade 5: Simply place the blade on the central shaft j and press until it rests in

place (B).

Important: Always insert blade 5 before putting in food.

●When using the slicer/shredder: Insert the cutting insert you want (l, m) into the carrier disc n. Insert the sharp side first; then snap the side with

the arrows in place (C).

Then place the carrier disc n on the central shaft j (D).

MC 200 only:

●When using the beater disc ob and deflector oa: Place the beater disc in the working bowl first (H) and then push the deflector over the two notches of the working bowl so that it fits exactly into the

grooves inside the bowl (K).

Place the lid 7 on the working bowl 4, coupling the lock 8 on the lid 7 with the guide rail on the motor base 1. Turn the lid clockwise until it engages onto the motor base 1 with an audible click (E). For

safety reasons, the motor will only operate if the lid 7 has been locked properly.

Processing in the working bowl

●Insert the food you want to process into the working bowl only after you have inserted the blade 5.

●Do not exceed the maximum capacity indicated in the tables.

Depending on what you want to process, the

ingredients can either be put directly into the work- ing bowl 4 or through the feed tube 6 even while the motor is running (F).

3