Kramer Electronics user manual Your WP-220E Front Panel, Feature Function

Your WP-220E XGA/Audio/Video Line Driver

4.2 Your WP-220E Front Panel

Figure 2 and Table 1 define the front panel of the WP-220E:

Figure 2: WP-220E Front Panel

Table 1: WP-220E Front Panel Features

#	Feature			Function
1			GAIN Trimmer	Adjusts1 the left audio output signal level
2			IN RCA Connector	Connects to the unbalanced left stereo audio source
3	AUDIOLINE	RIGHTLEFT	GAIN Trimmer	Adjusts1 the right audio output signal level
4			IN RCA Connector	Connects to the unbalanced right stereo audio source
5	PC AUDIO IN 3.5mm Mini Jack			Connects to the unbalanced stereo audio PC source
6	Holes (2)			For fastening the wall plate in place
7	ON LED			Illuminates when receiving power
8	XGA2 INPUT HD15F Connector			Connects to the XGA2 source
9	EQ.3 Trimmer			Adjusts1 the XGA2 cable compensation equalization level
10	CV IN RCA Connector			Connects to the composite video source
11	EQ./ LEVEL Trimmer			Adjusts1 the CV cable compensation equalization level

1 Insert a screwdriver into the small hole and carefully rotate it, trimming the appropriate level 2 Can be used for any RGBHV resolution (for example, VGA, XGA, UXGA and so on)

3 Degradation and VGA/XGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a total loss of sharpness in high-resolution signals

4 KRAMER: SIMPLE CREATIVE TECHNOLOGY