Windmere WCM2022C How to Use, Product may vary slightly from what is illustrated, Coffee Filters

Product may vary slightly from what is illustrated.







MAX
4
3
2	







How to Use

This product is for household use only.

Coffee Filters

Your coffemaker comes with a permanent filter. You may use a Cone-shaped paper filter if desired. Cone-shaped paper filters are available locally at grocery stores and where coffee makers are sold. Standard #2 filters should be used.

The use of basket-style paper filters is not recommended, since they do not conform to the shape of the Filter Basket and may cause coffee to back up and spill over during brewing.

Before You Use Your Coffeemaker

Before preparing coffee in your new Coffeemaker, thoroughly clean the Carafe, Carafe Lid and Removable Cone Filter Basket in hot, sudsy water. Rinse and dry. Replace disassembled parts. Clean the inside of the Coffeemaker by brewing two full Carafes of tap water (see BREWING INSTRUCTIONS below). Do not place coffee in Removable Cone Filter Basket for this initial cleaning.

Note: At the end of first cycle, turn Coffeemaker off and wait ten minutes. Turn unit on and brew second Carafe of water.

Brewing Instructions

1.Plug Coffeemaker into any 120 V AC electrical outlet.

2.Fill Carafe with cold tap water and pour into Water Window. Markings on the Carafe indicate level of water required to brew desired number of cups. No less than two cups is recommended.

Note: The amount of brewed coffee will always be less than the amount of water placed into Coffeemaker, since about 10% is absorbed by coffee grounds and paper filter.

†1. Swing-out brew basket (Part# WCM2022C-01 )

†2. Permanent nylon mesh filter (inside) (Part# WCM2022C-02)

3.Auto pause & pour (not shown)

4.Water window with level markings

†5. 570 mL (4-cup) capacity glass carafe (Part# WCM2022C-03)

6.Power indicator light

7.ON/OFF (I/O) switch

8.Ergonomic carafe handle

†Consumer replaceable/removable parts

3

3.Place the Permanent Filter in the Swing-Out Filter Holder. Measure one level tablespoon of drip or regular grind coffee for each cup of coffee desired. For stronger or milder coffee, adjust amount of coffee to suit your taste.

4.Return Swing-Out Filter Holder to the closed position.

5.Place Carafe on Warming Plate.

6.Switch Power Select Button to ON (I).

7.If you wish to serve a cup of coffee before brew cycle is completed, simply remove Carafe from Warming Plate. Dripping will automatically cease. Return Carafe to position on Warming Plate within 20 seconds; dripping will resume.

8.Upon completion of the brew cycle, wait about one minute until the brew dripping from the Removable Cone Filter Basket into the Carafe has stopped. Carafe Lid should be kept in place to facilitate safe serving and help keep coffee at proper serving temperature.

9.To keep coffee hot, return Carafe to the Warming Plate after serving. The Warming Plate will automatically cycle to maintain ideal serving temperature as long as the Coffeemaker is ON.

10.Switch Coffeemaker to OFF (O) when Carafe is empty or when unit is not in use.

11.To brew another Carafe of coffee, turn unit OFF and wait 10 minutes to allow heating element to cool.

4