Bloomfield 9600 Single Cup owner manual Operation Brewing Coffee, Burn Hazard

Page 11

OPERATION - BREWING COFFEE

1.Unlock the pod holder by pulling the LOCKING LEVER fully forward.

2.Pull the BREW TRAY fully forward, then lower tray.

NOTE: Normally, the brewer will automatically discard the last pod. If the brewer has not been used for some time, the used pod may need to be removed by hand. Deposit the used pod in the pod bin.

3.Center a fresh pod on the grid of the LOWER POD HOLDER.

4.Raise the BREW TRAY and slide fully to the rear.

5.Gently pull the LOCKING LEVER DOWN, then push it fully to the rear to lock the pod holder.

6.Place an EMPTY cup on the CUP GRID, under the BREW NOZZLE.

7.When the READY light glows, press the appropriate BREW KEY. Fresh coffee (or tea) will begin to fill the cup.

Three beeps will sound. When all dripping stops, beverage is ready to serve.

SUGGESTION: If the brewer is likely to remain unused for some time, discard the used pod:

1.Unlatch the pod holder by pulling the LOCKING LEVER fully forward.

2.Pull the BREW TRAY fully forward. This will automatically eject the used pod.

3.Slide the tray fully to the rear. In order to prevent an unintended brew, do not lock the pod holder.

CAUTION:

BURN HAZARD

Exposed surfaces of the brewer may be HOT to the touch, and can cause serious burns.

CAUTION:

BURN HAZARD

To avoid splashing or overflowing hot liquids, ALWAYS place an EMPTY cup on the cup grid before starting the brew cycle. Failure to comply can cause serious burns.

CAUTION:

BURN HAZARD

After a brew cycle, pod holder and used pod may be HOT. Remove and dispose of used pods with care. Failure to comply can cause serious burns.

NOTE: Press the same BREW SELECT KEY at any time during the brew to CANCEL.

FOR HOT WATER: Place an empty cup on the CUP GRID under the

FAUCET NOZZLE. Press the HOT WATER DISPENSE button. Release the button to stop the flow.

NOTE:

Hot water dispense is disabled during brew cycle.

If the EMPTY DRAW light is lit, the used pod bin is full. Remove the drip tray assembly, then withdraw and empty the POD DRAWER.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 687 Warranty Statement Applicability Table of ContentsSpecifications Features and Operating Controls Automatic Brewers Burn Hazard Precautions and General InformationAgency Listing Information Electrical DamageUnstable Equipment Hazard InstallationLeveling the Unit PLUMBER’S Installation Instructions InstallationShock Hazard ELECTRICIAN’S Installation InstructionsSTART-UP OperationOperation Program Brew VolumesOperation Brewing Coffee Procedure Clean Coffee Brewer Cleaning InstructionsSanitizing Instructions Procedure Sanitize Coffee BrewerSymptom Possible Cause Suggested Remedy Troubleshooting SuggestionsServicing Instructions Access PanelsServicing Instructions Temperature AdjustmentReplace Heating Element Remove Tank LID AssemblyReplace Thermostat Cotherm Replace Solenoid Clean Solenoid ScreenClean Lower POD Holder Clean Upper POD HolderReplace Controller Controller Wiring ConfigurationChemical Burn Hazard Procedure Delime the Water TankCabinet Components Exploded View & Parts ListExploded View & Parts List Brew Tray Components Drawer Front Service Parts Kits Wiring Diagram Telephone Fax

9600 Single Cup specifications

The Bloomfield 9600 Single Cup Brewer is a standout in the realm of coffee brewing technology, designed for both commercial and home use. This machine is ideal for those who appreciate a fresh, flavorful cup of coffee without the hassle of brewing a full pot. With its advanced features and user-friendly design, the 9600 integrates convenience and quality seamlessly.

One of the key highlights of the Bloomfield 9600 is its single-cup brewing capability. This allows users to enjoy freshly brewed coffee anytime without a prolonged wait. Ideal for small offices, cafes, or home kitchens, the brewer eliminates the worry of waste, as it brews just the right amount for immediate consumption. Furthermore, the intuitive controls make it easy for anyone to operate, regardless of their technical expertise.

The 9600 employs a unique brewing technology that ensures consistent temperature and extraction time, resulting in a rich and aromatic brew. Its precision brewing system guarantees that water is heated to the optimal temperature for coffee extraction, which is crucial in bringing out the coffee's full flavor profile. Additionally, this machine features programmable brewing cycles, allowing users to customize strength and flavor according to their preferences.

The design of the Bloomfield 9600 also emphasizes user convenience. With a compact footprint, it easily fits on countertops without taking up too much space. An integrated water reservoir minimizes refilling frequency, while its easy-to-clean components ensure maintenance is straightforward and hassle-free.

Energy efficiency is another significant characteristic of the 9600. The machine is equipped with an automatic shut-off feature, conserving energy when it’s not in use. This is particularly beneficial in commercial settings, where energy costs can add up over time.

Overall, the Bloomfield 9600 Single Cup Brewer is an exemplary choice for coffee lovers seeking quality and convenience in one package. With its high-end brewing technology, ease of use, and energy-efficient design, this machine is poised to elevate the coffee experience for users while fitting seamlessly into a modern lifestyle. Whether for personal use or in a professional setting, the Bloomfield 9600 promises to deliver exceptional coffee with every cup.
Top Page Image Contents