Servicing Instructions DE-LIMING Heater Tank

SERVICING INSTRUCTIONS — DE-LIMING HEATER TANK

CAUTION - CHEMICAL

BURN HAZARD

De-liming chemicals are caustic. Wear appropriate protective gloves and goggles during this procedure.

CAUTION - CHEMICAL

BURN HAZARD

Never siphon de-liming chemicals or solutions by mouth.

This operation must only be performed by qualified and experienced service personnel.

IMPORTANT: DO NOT spill, splash or pour water or de-liming solution into or over any internal component other than the inside of the water tank.

IMPORTANT: DO NOT allow any internal components to come into contact with the de-liming solution. Take care to keep all internal components dry.

NOTE: Repeat steps 4 thru 7 as required to remove all scale and lime build-up.

NOTE: Normally, silicone hoses do not need to be de-limed. Should de-liming hoses become necessary, Bloomfield Industries recommends replacing the hoses.

1.Disconnect brewer form the electrical supply. Turn off the water supply and disconnect water supply from the brewer inlet fitting.

2.Remove the top panel or top warmer section to gain access to internal components.

3.Disconnect water level sensor and water temperature sensor from the controller. On 120V units, slip hi-limit thermostat from under its holder clip. Disassemble the three lid clips and lift the lid off of the water tank. Store lid assembly in a safe location.

4.Mix de-liming solution according to the manufacturer’s directions. Add the de-liming solution to the water tank. Set lid assembly back on tank. Allow to sit for 30 minutes, or as directed by the manufacturer.

5.At end of soaking period, remove lid assembly from tank. Thoroughly rinse interior components of lid assembly with clear water. Wipe temperature sensor and water level sensor with a clean, soft cloth. Store lid assembly in a safe location.

6.Using a stiff bristle brush, scrub the coils of the heating element and the interior surfaces of the water tank.

7.Siphon the used solution and loose lime/scale into an appropriate container. Dispose of the used solution as required by local ordinances.

CAUTION: Never siphon by mouth. Serious injury can result!

8.Fill the water tank with clean tap water. Rinse thoroughly, then siphon the rinse water into an appropriate container for disposal. Again, take care to keep all internal components dry.

9.Reassemble the tank lid to the water tank. Make sure the gasket is properly attached to the lid before assembling the lid clips. Re-connect the water level and temperature probes, then reinstall the hi-limit thermostat (if removed). Verify that all internal components are dry, then reinstall the top panel.

10.Reconnect brewer to water and electrical. Run and discard at least three full decanters from the faucet. Install the brew chamber without filter paper or grounds, then run and discard at least three full decanters as normal brew.

11.Brewer is ready to use.

2082, 2080, 2086EX, 2086, 2088 specifications

Bloomfield has established itself as a leader in the world of high-performance computers with its innovative series of models including the 2086, 2088, 2088EX, 2080, and 2086EX. Each of these models comes packed with unique features, technologies, and characteristics that cater to a wide range of users from casual enthusiasts to professional power users.

The Bloomfield 2086 model is known for its powerful processing capabilities, featuring a multi-core architecture that enhances multitasking performance. It is equipped with cutting-edge thermal management technology, ensuring optimal performance even under heavy workloads. Users appreciate the 2086 for its energy efficiency, which is vital for keeping operational costs down in data-intensive environments.

The Bloomfield 2088 takes performance a step further, delivering enhanced graphics capabilities thanks to its advanced GPU integration. This model is ideal for professionals in creative fields, providing the graphical prowess necessary for tasks such as video editing and 3D rendering. The 2088 also includes superior connectivity options, facilitating seamless integration with various peripherals.

For those who demand even more, the Bloomfield 2088EX stands out with its extreme performance specifications. This version is designed for high-end gaming and complex computing tasks. It boasts an expanded memory capacity and faster data transfer speeds, allowing for lightning-quick response times. Built for reliability, the 2088EX features rugged construction, making it suitable for both office setups and mobile workstations.

The Bloomfield 2080 model is tailored for versatility, offering a balanced blend of power and efficiency. It's a popular choice for users who need a reliable machine for everyday tasks and moderate gaming. This model supports a wide range of software applications, ensuring compatibility with various operating systems and user needs.

Finally, the Bloomfield 2086EX combines the best features of its predecessors while introducing innovative technology elements such as AI-driven performance optimization. This model is designed for those who rely heavily on data analysis and machine learning applications. With its advanced cooling system, the 2086EX stays cool under pressure, ensuring consistent performance during intensive computational tasks.

In summary, the Bloomfield series—comprising the 2086, 2088, 2088EX, 2080, and 2086EX—offers a diverse lineup that meets the needs of different users. With robust performance, adaptability, and state-of-the-art technology, Bloomfield continues to set the standard in high-performance computing.