Kramer Electronics user manual Installing the VM-20HD on a Rack, Before Installing on a Rack

Page 8

Installing the VM-20HD on a Rack

5 Installing the VM-20HD on a Rack

This section describes what to do before installing on a rack and how to rack mount.

Before Installing on a Rack

Before installing on a rack, be sure that the environment is within the recommended range:

Operating temperature range +5 to +45 Deg. Centigrade

Operating humidity range

5 to 65% RHL, non-condensing

Storage temperature range

-20 to +70 Deg. Centigrade

Storage humidity range

5 to 95% RHL, non-condensing

￿ CAUTION!!

When installing on a 19" rack, avoid hazards by taking care that:

1It is located within the recommended environmental conditions, as the operating ambient temperature of a closed or multi unit rack assembly may exceed the room ambient temperature.

2Once rack mounted, enough air will still flow around the machine.

3The machine is placed straight in the correct horizontal position.

4You do not overload the circuit(s). When connecting the machine to the supply circuit, overloading the circuits might have a detrimental effect on overcurrent protection and supply wiring. Refer to the appropriate nameplate ratings for information. For example, for fuse replacement, see the value printed on the product label.

5The machine is earthed (grounded) in a reliable way and is connected only to an electricity socket with grounding. Pay particular attention to supply connections other than direct connections to the branch circuit (for example, the use of power strips), and that you use only the power cord that is supplied with the machine.

How to Rack Mount

To rack-mount a machine:

1Attach both ear brackets to the machine. To do so, remove the screws from each side of the machine (3 on each side), and replace those screws through the ear brackets.

2Place the ears of the machine against the rack rails, and insert the proper screws (not provided) through each of the four holes in the rack ears.

Note that:

￿In some models, the front panel may feature built-in rack ears

￿Detachable rack ears can be removed for desktop use

￿Always mount the machine in the rack before you attach any cables or connect the machine to the power

￿If you are using a Kramer rack adapter kit (for a machine that is not 19"), see the Rack Adapters user manual for installation instructions (you can download it at: http://www.kramerelectronics.com)

6

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 8
Contents VM-20HD Contents TablesIntroduction Getting StartedGetting Started Overview Your VM-20HD Dual 110 HD/SD SDI Distribution AmplifierVM-20HD Dual 110 HD/SD SDI Distribution Amplifier VM-20HD Dual 110 HD/SD SDI Distribution Amplifier Features Installing the VM-20HD on a Rack Before Installing on a RackPage Technical Specifications Includes the technical specificationsLimited Warranty 2900-000321 REV

VM-20HD specifications

Kramer Electronics VM-20HD is a state-of-the-art high-definition distribution amplifier specifically designed to enhance the quality and integrity of video signals in a variety of professional environments. This device is ideal for applications ranging from broadcast studios to corporate settings, where high-quality video distribution is essential.

One of the standout features of the VM-20HD is its ability to distribute multiple high-definition video signals simultaneously. The device supports various resolutions, including 1080p and lower, ensuring compatibility with a wide range of sources and displays. With a robust input capacity, it can accept two HDMI signals, which can be routed to up to 20 outputs efficiently.

The VM-20HD incorporates advanced signal processing technologies that ensure minimal signal degradation. This is essential in maintaining the clarity and quality of video signals over long distances, meeting the stringent demands of professional installations. The built-in equalization and amplification functions compensate for any loss that may occur due to long cable runs, making it a reliable choice for installations where quality is paramount.

Another characteristic worth noting is its user-friendly interface and control options. The VM-20HD features front-panel buttons and LED indicators that allow for easy monitoring and management of input and output signals. Additionally, remote control capabilities enhance usability, making it convenient for operators to adjust settings from a distance.

The VM-20HD is designed with a robust, rack-mountable enclosure, ensuring durability and ease of installation in various environments. Its compact size allows for efficient use of space in crowded racks, and it can be mounted in any standard 19-inch rack configuration.

Furthermore, Kramer Electronics emphasizes the importance of compatibility in its devices. The VM-20HD is HDCP-compliant, ensuring that it can handle protected content seamlessly without interruptions. This makes it an excellent choice for media environments where copyright protection is a consideration.

In summary, the Kramer Electronics VM-20HD serves as an indispensable tool for professional video distribution. With its high-definition capabilities, advanced signal processing, user-friendly features, and robust design, it meets the needs of today's demanding audiovisual landscapes. Whether used in a corporate boardroom, educational institution, or broadcast environment, the VM-20HD stands out as a reliable and high-performance distribution amplifier.