11.Install the grilles to the speakers:
Push the grille fastener into the hole in front of the baffle
Press the grille into place until the front of the grille is flush with the rim of the baffle
Check that the grille is securely seated
To remove the grille, insert two bent paper clips into the holes in the i grille and carefully pull it down. Repeat this around the perimeter of
the grille until it is completely removed.
5.4Painting the Speaker
You can paint the speakers before or after they are installed.
When painting before installation:
•Clean the rim and grille with mineral spirits or other light solvent that is unlikely to damage the surface
•Spray with color by holding the spray can at an angle of 45°
iWhen spraying the grille, take care not to clog the holes in the grille as this will greatly reduce the sound quality of the speakers.
When painting after installation:
•Use the circle that you cut out of the template as a paint mask
•After you finish painting, remove the paint mask
10 |