Bravetti BR220 manual How to Use the Plate Warmer, Using the Bread Warming Rack

Page 5

How to Use the Plate Warmer

Place the plate warmer on a flat, sturdy surface.

Insert the plug into the 120 volt wall outlet.

Open the covers (1) to the left and right.

Turn the On/Off switch (4) to “On” position.

The indicator light (5) will turn on. Wait for a few minutes to let the unit attain operating temperature. You can now place the plates into their grooves to be warmed - Rotate 180° after 10 minutes for other side to warm up. Please note that the indicator light (5) will go off when temperature has been reached and will come on again when unit has cooled down.

When the plates are warmed, they can be removed from the plate warmer using an oven mitt.

When you are finished using the unit, turn the On/Off switch (4) to “Off” position, unplug the unit from the wall outlet.

Make sure that the plate warmer has cooled down before storing it away.

NOTE: - There are twelve (12) grooves in the plate warmer into which plates with a maximum diameter of 30cm/12 in. may be placed vertically.

-Bread, buns, croissants to be warmed should be placed on the bread warming rack (7).

-Never cook on the plate warmer.

Please Note: Some plates might be more difficult to stand on the plate warmer due to the different depths of the plates. Please use caution when placing plates on the plate warmer.

Caution: Always use an oven mitt to remove the plates from the plate warmer.

Caution: When removing plates from plate warmer, please note that the bottoms of the plates which are placed vertically on the plate warmer get hotter than the tops because they are closer to the heating elements (#6). Hold only from the top when removing the plates from the plate warmer.

Warning: The sides and bottom of the metal housing (#3) get very warm. It is recommended that you use an insulated hot pad underneath the unit to avoid any heat damage to your counter or furniture. Do not place directly on a table cloth - it could cause a fire.

Please Note: Some ceramic plates warm up faster than other types of plates. Also, small plates heat up more rapidly than larger plates. Therefore, never place small plates in between larger plates because they will be too hot to handle.

Using the Bread Warming Rack (7)

Place the bread warming rack (7) on top of the removable plate (2).

Insert the 4 metal wire hooks (10) (located at the corners of the rack) into the 4 holes in the removable plate (2).

Place the bread, buns, etc.. To be warmed on top of the bread warming rack (10)

4

Image 5
Contents Plate Warmer Special Safety Instructions Main Components Prior To First Use, Clean The Unit Thoroughly Before Using for the First TimeUsing the Bread Warming Rack How to Use the Plate WarmerCleaning and Maintenance of Plate Warmer Bravetti / EURO-PRO