Assembly Instructions
Assembly Instructions
Before using your food processor for the first time, do the following:
1.Read all the instructions in this instruction manual.
2.Remove the unit from packaging.
Warning: BLADES ARE VERY SHARP! Take extra care when removing the protective blade covers to prevent injuries.
PROTECTIVE |
BLADE |
COVERS |
Fig. 2
Using the Lower Chopping Blade Only
• Place the food processor bowl |
securely on the main body. (Fig. 1) |
• Once the food processor bowl is |
securely in place, remove the |
protective blade cover from the |
lower chopping blade and carefully |
place the lower chopping blade onto |
the shaft the food processor bowl. |
•Once in place, use thumb to press on the base of the blade to snap it into place. (Fig. 6) Ensure that the blade holder is securely in place before continuing.
Caution: Handle blade carefully to avoid cuts and injuries.
Important Note: Always replace the protective blade covers onto the blades when the blades are not in use.
3.Wash the unit and attachments according to the “Maintenance & Cleaning” section. DO NOT
IMMERSE MAIN UNIT IN WATER.
4.Once the unit has been thoroughly cleaned, it is ready for assembly and use.
Assembling the Food Processor
The food processor can be used either with both the upper and lower chopping
UPPER
CHOPPING
BLADE
Fig. 3
CAUTION!
BLADES
ARE
SHARP!
LOWER
CHOPPING
BLADE
(Fig. 4) |
Using the Blade Holder
• Place the food processor bowl | |
securely on the main body. (Fig. 1) | |
• Select the desired blade. There are | |
five (5) different blades to choose | |
from: | |
1. | Thin Shredding Blade |
2. | Thick Shredding Blade |
3. | Thin Slicing Blade |
4. | Thick Slicing Blade |
5. | Grating Blade |
• To attach the blade to the blade | |
PRESS
ON THE
BASE OF
THE
BLADE
TO SNAP
IT INTO
PLACE
Fig. 6
•To remove the blade from the blade holder, push the blade from the back of the blade holder. (Fig. 7)
blades or just the lower chopping blade. The food processor can also use either of the blade holders instead of the chopping blades.
Note: Before assembling the food processor, ensure that it is NOT plugged into an electrical outlet.
Assembling Both Chopping Blades
•Place the food processor bowl securely on the main body. (Fig. 1)
| FOOD |
| PROCESSOR |
| BOWL |
Fig. 1 | MAIN BODY |
|
•After having assembled the chop- ping blades, carefully place the chopping blade assembly onto the shaft of the food processor bowl. (Fig. 4) Ensure that the blades are securely in place before continuing.
| CHOPPING | |
| BLADE | |
| ASSEMBLY | |
| FOOD | |
Fig. 4 | PROCESSOR | |
SHAFT | ||
|
holder, take the blade holder in one |
hand and insert the blade tab first |
into the opening. (Fig. 5) |
Caution: Handle blade carefully to avoid cuts and injuries.
BLADE |
BLADE |
TAB |
Fig. 5
BACK OF
BLADE
HOLDER
PRESS
DOWN ON
BACK OF
BLADE
Fig. 7
•Once the food processor bowl is securely in place, remove the protective blade covers and carefully assemble the upper and lower chopping blades. (Fig. 2 & 3)
4
5