Bravetti K5309H owner manual Multi-Stage Cooking, Express Cooking, Auto-Menu

Operating Instructions

Multi-Stage Cooking

Multi-Stage cooking is a useful feature when the need for two different stages or levels of cooking are needed. This oven can be programmed for up to 2 stages of cooking. For example, cooking with 100% microwave power for 5 minutes, and then 70% microwave power for

10 minutes:

1.Press “Microwave” once to select power level of 100% (“P100” will shown on the digital display indicating that the oven at 100% power).

2.Press the number buttons on the control panel to set the desired cooking time for 5 minutes by pressing “5” – “0” – “0”.

3.Press “Microwave” four times to select power level of 70% (“P70” will shown on the digital display indicating that the oven at 70% power).

4.Press the number buttons on the control panel to set the desired cooking time for 10 minutes by pressing “1” - “0” - “0” – “0”.

5.Ensure that door is closed securely and press the

“Start/+30SEC” button to start the cooking process. The cooking time will begin to count down immediately.

Important: The oven will beep once after the first stage of cooking, and then the second stage will begin.

Note: If you would like to temporarily stop the cooking process, press the “Stop/Clear” button on the control panel once to stop it and then press the “Start /+30SEC” button to restart the cooking process.

You can also stop the cooking process by opening the door. To restart the cooking process, close the door and press the “Start/+30SEC” button.

If you want to cancel a cooking process, press the “Stop/Clear” button twice to cancel.

Note: If needed, press the “Start/+30SEC” button to add an additional 30 seconds of cooking time once cooking has commenced. You may press this button more than once to increase the time by 30 second increments.

4.When cooking is complete, the microwave will beep 5 times to signal that it is finished.

Important: If stopping cooking process prematurely, press the “Stop/Clear” button to clear the display and reset the system before starting another cooking session.

Express Cooking

Cooking at 100% power level can be achieved quickly and easily by using the express cooking method. The numbers “1” to “6” on the control panel act as quick-start cooking times in minutes (i.e. number “1” is one minute, “2” is two minutes, etc). To use the express cooking function:

1.Press on one of the numbers “1” through “6” and the cooking process and time count down will begin immediately.

Note: If you would like to temporarily stop the cooking process, press the “Stop/Clear” button on the control panel once to stop it and then press the “Start /+30SEC” button to restart the cooking process.

You can also stop the cooking process by opening the door. To restart the cooking process, close the door and press the “Start/+30 Sec.” button.

If you want to cancel a cooking process, press the “Stop/Clear” button twice.

Note: If needed, press the “Start/+30SEC” button to add an additional 30 seconds of cooking time once cooking has commenced. Press the “Start/+30SEC” more than once for more than 30 seconds.

2.When cooking is complete, the microwave will beep 5 times to signal that it is finished.

Important: If stopping cooking process prematurely, press the “Stop/Clear” button to clear the display and reset the system before starting another cooking session.

Memory

Use this feature to save a cooking program with up to two stages of cooking. You can save up to three different memory programs. To use this feature:

1.Press the “Memory” button once and the digital display will show the number “1”.

2.Set one or two stages of cooking (for two stages of cooking follow the directions for “Muti-Stage Cooking”).

3.Once finished having entered the cooking stages, press the “Memory” button to confirm and save.

Repeat the previous steps in order to save two other cooking programs (for step 1 you would press it twice for the second saved program or three times for the third saved program). When wanting to use one of the three saved programs, press the memory button until you have selected the correct one (“1”, “2”, or “3”), and then press the “Start/+30SEC” button.

Auto-Menu

There are nine different auto-menubuttons. Each button is pre-set for temperature and given weights, and when using the auto-menubuttons there is no need to set the time because it is already pre-determined. To use these auto- menu functions:

1.Press the one of the nine auto-menubuttons. All auto-menubuttons can be pressed up to three times in order to match the actual weight of the food with the pre-set weights (see table on following page).

2.Press the “Start/+30SEC” button to start the cooking process. The cooking time will begin to countdown immediately.

11