Metra Electronics 99-2005 Cadillac Eldorado Cadillac Seville, Dash Disassembly, Figure A, B C D E

Page 3
99-2005DASH DISASSEMBLY

99-2005DASH DISASSEMBLY

CADILLAC ELDORADO 1996-2002

CADILLAC SEVILLE 1996-1997

1 Disconnect the negative battery ter-

A

minal to prevent an accidental short circuit.

2 Remove C-clip on forward facing side of shift knob and pull and remove knob.

(Figure A)

3Remove (2) 9/32 screws on each side of the ashtray assembly and (1) in the mid- dle underneath ashtray insert. (Figure B)

4Insert a small flat blade screwdriver in between the radio and the switch panel at top of radio and pry up and out to remove switch panel. (Figure C)

5Remove (4) 9/32 screws

(2) from the top (Figure D) and

(2) from the bottom to remove radio. (Figure E)

6Remove the (6) retaining nuts securing the radio and climate control to the facto- ry bracket assembly and slide the climate control outward. (Figure F)

Continue to kit assembly

F

 

 

 

ts

 

 

ng Nu

 

taini

 

ove 3 Re

 

 

Rem

Per Side

 

 

 

 

 

B

C

DCADILLAC ELDORADO 1996-2002

E

1

Image 3
Contents 99-2005 APPLICATIONSINSTALLATION INSTRUCTIONS FOR PART KIT FEATURESKit Assembly 99-2005TABLE OF CONTENTS Dash DisassemblyFigure A 99-2005 DASH DISASSEMBLYContinue to kit assembly CADILLAC ELDORADO CADILLAC SEVILLECADILLAC SEVILLE Figure D99-2005 DASH DISASSEMBLY Continue to kit assemblyCADILLAC DEVILLE 99-2005 DASH DISASSEMBLYContinue to kit assembly S-Efrom the radio housing. Figure A 99-2005 KIT ASSEMBLYContinue to kit assembly the bracket / housing assembly andContinue to kit assembly CADILLAC SEVILLE CADILLAC DEVILLE CONCOURSCONSOLE SHIFT 99-2005 KIT ASSEMBLYCADILLAC DEVILLE 99-2005 KIT ASSEMBLYContinue to kit assembly DIN HEAD UNIT PROVISION 99-2005 KIT ASSEMBLYContinue to kit assembly ISO DIN HEAD UNIT PROVISION 99-2005 KIT ASSEMBLYContinue to kit assembly METRA / EIA WIRING CODE 99-2005 FINAL ASSEMBLYFINAL WIRING CONNECTIONS FINAL ASSEMBLY99-2005INSTRUCTIONS