Accessories for Food Processor with Blender
Model EP90XX
12
3 4
1.Blender Jar
2.Blender Jar Cover
3.Chopping Blade
4.Chopping Blade Protective Cover
Using the Blender
CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments and before cleaning.
1.Remove the processor bowl and lid.
2.Remove the safety cover. This can only be done once the processor lid has been removed.
3.Place the blender into its location on the processor body with the handle to the left. Turn counter clockwise until the blender clicks into place and the arrows are aligned.
Warning: Use extreme caution - blades are sharp. Handle carefully.
4.Place food in blender.
5.Place the blender lid and the measuring cap on the blender.
6.Replace the processor bowl and processor lid. Ensure that the lid tab has clicked into place. The blender will not operate if the processor lid is not clicked in place.
7.Plug in the processor.
8.Always operate the blender with the lid in place.
TO REMOVE THE
BLENDER, YOU MUST
FIRST UNLOCK AND
REMOVE THE
PROCESSOR LID (A).
THEN UNLOCK ANS
RMOVE THE BLENDER (B)
BY TWISTING
CLOCKWISE.
WARNING:
ALWAYS REMOVE THE
BLENDER AND FIT THE
SAFETY COVER (2) INTO
THE RPOCESSOR BODY
(1)WHEN USING THE PROCESSOR.
IMPORTANT: Remove protective blade cover(s) before use. Protective blade covers to only be used for storage.
CAUTION: Never operate the blender with more than 42 oz. (1250 ml) of liquid or when empty.
•Recommended speed levels for blending are between 5 - Max.
•Do not overload past the MAX level on the blender.
•You can crush 10 oz. of ice cubes in
•To prevent spilling, do not operate the blender with more than 42 oz. (1250 ml) of liquid.
•Avoid contact with moving parts at all times.
•Do not blend boiling liquid.
•To reduce the risk of severe injury to people or damage to the blender, keep hands, hair, clothing as well as spatulas and other utensils out of container while blending.
Rev. 08/01C