AEG C 8 18 43-4I installation instructions Energy Saving Tips, Ice Pack, Preparation of Ice Cubes

Page 11

 

• Many proprietary kitchen surface cleaners contain chemicals that can

 

attack/damage the plastics used in this appliance. For this reason it is

 

recommended that the outer casing of this appliance is only cleaned with

 

warm water with a little washing-up liqiud added.

1.

Remove frozen food and the food from the refrigerator. Wrap frozen

 

food in several layers of newspaper. Store it in a cool place, well covered.

2.

Switch the appliance off and remove the plug from the mains, or switch off.

3.

Clean the appliance and the inte-

 

 

rior accessories with

lukewarm

 

 

water and with a little bicarbonate

 

 

of soda added (5ml to 0,5 litre of

 

 

water).

 

 

4.

Dry the appliance thoroughly.

 

5.

Check the water drain hole on the

 

 

rear wall of the fridge. Clear a

 

 

blocked drain hole with the aid of

 

 

the drain cleaning tool included

 

 

with the appliance.

 

 

6.

When everything is dry switch the

D037

 

 

appliance back on.

 

 

Energy Saving Tips

Do not install the appliance near radiators or other sources of continuous warmth. High ambient temperatures cause longer, more frequent opera- tion of the compressor.

Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. Never cover air vent openings.

Do not place warm foods into the appliance. Allow warm foods to cool first.

Do not leave the door open any longer than necessary.

Do not set temperature any colder than necessary.

Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

Please note the maximum storage times specified by the manufacturer.

Thawed foods which have not been processed further (cooked into meals) may not under any circumstances be frozen a second time.

Containers with flammable gases or liquids can leak at low temperatures. There is a risk of an explosion! Do not store any containers with flamma- ble materials such as, for example, spray cans, fire extinguisher refill car- tridges etc in the refrigerator/freezer.

Bottles and cans must not be placed in the freezer. They can burst when the contents freeze, high carbonate content drinks can even explode! Never store lemonade, juices, beer, wine, sparkling wine etc. in the freezer.

All foods must be packed air tight prior to freezing, so that they do not dry out or lose their flavour, and so that no flavour contamination of other frozen goods occurs.

Important! Do not touch frozen food with wet hands. Your hands could stick to the food.

1.Place the packed food in the drawers. Place food to be frozen in the upper drawer. Unfrozen food must not touch items already frozen, otherwise the frozen food could begin to defrost.

2.Press the fast freeze button 24 hours before introducing fresh food for free- zing. The yellow light comes on.

3.Place frozen foods in the drawers sorted by type, as far as possible.

Ice Pack

There are two ice packs in one drawer of the freezer.

In the event of a power failure or malfunction, the ice pack will lengthen the amount of time it takes for the frozen food to become too warm by several hours. The ice pack can only fulfil this task efficiently if it is placed in the uppermost drawer, at the front, above the frozen food. You can use the ice pack for cooling cold bags.

Preparation of Ice Cubes

1.Fill the ice cube tray 3/4 full with cold water, place it in the freezer com- partment and leave to freeze.

2.To loosen the frozen cubes, either twist the ice cube tray or hold it under running water for a few seconds.

Important! Never try to free an ice tray that is frozen to the freezer com- partment using pointed or sharp edged objects. Use the ice scraper supplied.

14

11

Image 11
Contents 05/05 AEG Hausgeräte GmbH Postfach 90327 NürnbergDear customer Contents Regulations, Standards, Guidelines SafetyDisposal Electrical Connection InstallationRemove Transport Packaging Disposal of Old AppliancesGuarantee Conditions Guarantee ConditionsOperating and Indicator Panel Starting Up and Temperature RegulationCustomer Care Department Interior AccessoriesService and Spare Parts 0870 5Moisture Regulator Changing the Light BulbYou can use your freezer for freezing fresh food yourself Fresh Food RefrigerationSomething Not Working Freezing and Storing Frozen FoodPreparation of Ice Cubes Energy Saving TipsIce Pack Defrosting Switching Off the ApplianceCleaning and Care Freezing Calendar

C 8 18 43-4I specifications

The AEG C 8 18 43-4I is an innovative and versatile electric tool designed to meet the demands of both professional tradespeople and DIY enthusiasts. Renowned for its robust performance and advanced technology, it has become a popular choice in various applications ranging from construction to home improvement.

One of the standout features of the AEG C 8 18 43-4I is its powerful motor, which operates on an 18V battery platform. This allows for a high degree of mobility without the constraints of cords, making it ideal for use in a range of environments, whether indoors or outdoors. The efficient motor ensures that it can handle tough materials with ease, providing consistent performance even under heavy loads.

The tool is equipped with advanced lithium-ion battery technology, ensuring fast charging and extended runtime. This means users can work longer without the interruption of frequent recharging, enhancing overall productivity. The C 8 18 43-4I also features an intelligent battery management system that protects against overloading and overheating, further increasing its longevity.

In terms of versatility, the AEG C 8 18 43-4I comes with a range of interchangeable attachments, allowing it to adapt to various applications such as drilling, cutting, and screwing. The tool’s quick-change chuck system enables swift swapping of attachments, minimizing downtime and maximizing efficiency.

Another noteworthy characteristic is its ergonomic design, which prioritizes user comfort during prolonged usage. The tool boasts a lightweight construction balanced with a rubberized grip that reduces vibration and enhances control. This thoughtful engineering minimizes fatigue, allowing users to work longer and more effectively.

Safety is also a prime consideration in the design of the AEG C 8 18 43-4I. It includes multiple safety features such as a blade guard and electronic brake system, helping prevent accidents and ensuring the well-being of the user.

Overall, the AEG C 8 18 43-4I blends power, efficiency, and safety in a compact design, making it an essential tool for both professional and personal use. Its innovative technology and user-centric features position it as a leader in the market, embodying AEG's commitment to quality and reliability in every product. Whether for intricate tasks or heavy-duty jobs, this tool stands ready to deliver exceptional performance and versatility.