16Automatic programmes
function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time.
Setting the Time delay function
DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then END function (refer to "Setting the DURATION" and "Setting the END ").
When the Time delay function is activated the display shows static symbol of the oven function, with a dot and . The dot shows which clock function is on in the Clock/ Residual heat display.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This function has no effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the appliance is off.
1.Touch .
and "00" flash in the display.
2.Use or to set MINUTE MINDER.
First you set seconds and then minutes and hours.
3. Touch or the MINUTE MINDER starts automatically after five seconds.
4. When set time ends, an acoustic signal operates for two minutes and "00:00" and flash in the display.
5.Touch any sensor field or open the oven door to stop an acoustic signal.
AUTOMATIC PROGRAMMES
WARNING!
Refer to "Safety information" chapter.
There are 20 automatic programmes and recipes. Use an automatic programme or recipe when you do not have a knowledge or experience how to prepare a dish. You can find the recipes for the automatic programmes in the "Recipe book".
There are three types of automatic programmes:
•Automatic recipes;
•Automatic programmes with weight input;
•Automatic programmes with core temperature sensor;
Automatic recipes
Setting an automatic recipe:
1.Touch two times until the display shows .
The display shows symbol and number of the automatic programme.