Novatel 3GOXX16A4-XTR-1-1 manual Additional Equipment Required, Installing the Antenna

Page 1

3GOXX16A4-XTR-1-1

ANTENNA GUIDE

OM-20000156

Rev 1

December 2013

The 3GOXX16A4-XTR-1-1 antenna is designed for airborne use, but works in any mobile application.

The 3GOXX16A4-XTR-1-1 is an active GPS antenna, 88.9 mm (3.5-inches) in diameter and operates at the GPS L1 frequency of 1575.42 MHz and the GPS L2 frequency of 1227.60 MHz. The antenna is a spherical radius molded radome that provides enhanced protection against rain and ice.

The antenna includes the following:

•internal 33 dB low noise amplifier

•bias voltage from 2.5-24 V DC for operation

•band pass filtering

•DC bias provided through the coaxial connector

NovAtel offers optional coaxial cables of various lengths to connect the antenna and NovAtel GNSS receivers.

The 3GOXX16A4-XTR-1-1 is aircraft certified for navigation. This guide provides the basic information you need to install and begin using your new antenna.

ADDITIONAL EQUIPMENT REQUIRED

•A device with an antenna input port that both receives the RF signal and provides 2.5 - 24.0 VDC to the antenna is required for the 3GOXX16A4-XTR-1-1. NovAtel GPS receivers provide the necessary power through their antenna RF connectors.

•Coaxial cable with a male TNC connector

INSTALLING THE ANTENNA

Both the input DC power and the output RF signal use a single coaxial cable connected to the unit's TNC female connector.

The antenna can be attached to a surface with a square, four bolt, 1.9-inch space mounting pattern as shown in the Mechanical Drawings section of this guide. Four screws pass through the antenna housing.

To install the antenna:

1.Install the supplied o-ring into the groove on the antenna base.

User-supplied o-ring grease can hold the o-ring in the groove during installation.

2.Pre-drill and tap the mounting holes and drill the connector clearance hole on the mounting surface. See the Mechanical Drawings section for mounting pattern details.

1

Image 1

Contents Additional Equipment Required Installing the AntennaRef. # Description Antenna Care Physical SpecificationsElevation Gain Patterns Mechanical Drawings Phase Centre Questions or Comments

3GOXX16A4-XTR-1-1 specifications

The Novatel 3GOXX16A4-XTR-1-1 is an advanced, compact communication and GPS tracking device that epitomizes cutting-edge technology in the realm of satellite communication and positioning systems. It is designed to provide robust connectivity, enhanced data transmission, and precise location tracking for a variety of applications, including transportation, logistics, and field services.

One of the main features of the Novatel 3GOXX16A4-XTR-1-1 is its versatility. It supports multiple communication protocols, including LTE, which ensures high-speed internet access and data transfer rates. This is particularly beneficial for businesses that require real-time information flow, allowing for efficient monitoring and decision-making processes.

The device is equipped with GPS capabilities, ensuring accurate positioning and location tracking. This makes it an essential tool for fleet management, as it allows businesses to monitor their vehicles' locations in real time, optimize routes, and enhance overall operational efficiency. The high sensitivity of the GPS receiver also ensures that it performs effectively in challenging environments, such as urban areas with tall buildings or rural regions with limited satellite visibility.

Another significant characteristic of the Novatel 3GOXX16A4-XTR-1-1 is its durability and rugged design. Built to withstand harsh environmental conditions, the device is resistant to dust, water, and extreme temperatures. This reliability makes it suitable for outdoor applications and ensures long-term performance, even in demanding scenarios.

Power efficiency is another notable aspect of this device. The Novatel 3GOXX16A4-XTR-1-1 is designed to consume minimal power, extending battery life and reducing operational costs for end users. This is particularly important for applications that require continuous tracking or monitoring, as it minimizes the need for frequent recharging or battery replacements.

Integration capabilities are also a highlight. The device can easily be integrated with existing systems, enhancing its utility in diverse operational settings. Businesses can leverage its features to develop customized solutions, catering to their specific needs and enhancing overall productivity.

In summary, the Novatel 3GOXX16A4-XTR-1-1 stands out with its multifaceted communication capabilities, precise GPS tracking, rugged design, energy efficiency, and seamless integration options. This combination makes it an invaluable asset for industries that rely on effective communication and precise location tracking to streamline operations and improve service delivery.