AEG 6524gm-m Cleaning, Enameled Burner Caps, Stainless Steel, Burners and Pan Supports, Gas taps

Page 5

C - Cleaning

WARNING:

Before any operation, disconnect the appliance from the electricity supply.

Do not clean the appliance while it is hot.

Enameled Burner Caps

The enameled burner caps must be washed with a sponge and soapy water or with a light detergent.

WARNING:

Do not use abrasive or corrosive products.

Do not leave substances, such as lemon or tomato juice, salt water, vinegar, coffee and milk on the enameled surfaces for a long time.

Stainless Steel

The stainless steel areas should also be cleaned with soapy water and then dried with a soft cloth.

WARNING:

Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive detergents for an extended period of time.

Stainless Steel can also discolour if in contact with excessive heat.

Burners and Pan Supports

These parts can be removed to make cleaning easier. The burners must be washed with a sponge and soapy water or with a light detergent, wiped well and placed in their housing perfectly.

After cleaning, check that the safety valve, start-up electrode and the flame-dividing ducts are not clogged with soap or grime.

The pan supports can be washed in a dishwasher.

Gas taps

WARNING: Lubrication of the gas taps must be carried out by specialized personnel, exclusively. In case of hardening or malfunctions in the gas taps, apply to the Customer Service.

5

Image 5
Contents User’s Manual Contents Installation check and warnings Cooking Instructions Using the burnersAutomatic start-up without valves Automatic start-up with valvesEnameled Burner Caps CleaningStainless Steel Burners and Pan SupportsFastening the top Installation and WarningsBench Cut-outs Replacing the power supply cable Adjusting the burnersGas Connection Electric connectionTechnical Diagrams Technical Diagrams Technical Characteristics Table Dimension DiagramsWarranty Showroom