99-7426 KIT ASSEMBLY
DOUBLE DIN RADIO PROVISION STACKED ISO MOUNT UNITS PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
1 Cut and remove the center bar from the radio housing. (Figure A)
2Snap the Double DIN brackets to the inside edge of the radio housing.
(Figure B)
3Slide the Double DIN or ISO mount unit(s) into the bracket/radio housing assembly and secure the unit(s) to the assembly using the screws supplied with the unit(s). (Figure C)
4 Snap the Double DIN trim plate onto the front of the radio/housing.
(Figure C)
A
B
Continue to final assembly.
C
5