Technical data sheet for
GAS GRIDDLE CONVECTION ELECTRIC OVEN RANGE 1200mm
GP8121GEC
| |
| 20mm thick griddle plate |
| Ribbed plate options |
| Chromed mirror plate options |
| Top weld sealed plates |
| 108MJ thermostatic griddle burner system |
| Separate left, centre, and right heat zones |
| GN 2/1 6.6kW electric convection oven |
| Drop down door |
| Storage cabinet on right hand side |
| Stainless steel exterior |
| Easy clean |
| Easy service |
| Fully modular |
Overall Construction | Controls |
• Galvanized steel chassis | • Large easy use control knobs - heat resistant reinforced |
• Welded hob surround with 1.5mm 304 stainless steel bull nose | • Easy view control settings on knobs |
• Splashback and hob sides 1.2mm 304 stainless steel | Griddle |
• Front panels and oven sides 0.9mm 304 stainless steel | • Separate left, centre and right side heat zones |
• Full 0.9mm stainless steel storage cabinet on right hand side | • Three |
• 150mm legs in 63mm dia. | • Flame failure pilot burners |
adjustable feet | • Piezo ignition to each pilot burner |
Griddle
•20mm thick machined top plates standard
•Optional ribbed plate sections
•Optional mirror finish hard chrome plates
•2.5mm thick 304 stainless steel splash guards sides and rear
•2.0mm thick grease channel
•Three 36MJ 3 bar even heat burners with dual thermostatic controls
•Full pilot and flame failure protection with piezo ignition
•Stainless steel grease drawer
•Overlapping finish at front and rear of plate for easy clean
Oven
•Fully welded and vitreous enamelled oven liner
•GN 2/1 capacity with 4 position racking
•
•Cast iron even heat oven sole plate
•6.5kW heating elements
•100W
•200mm diameter
•Welded frame drop down door with
•0.9mm 304 stainless steel door outer
•1.0mm press formed vitreous enamelled door inner
•High density fibreglass insulated
•Stay cool stainless steel door handle with cast metal handle mounts
•Supplied with two chrome wire oven racks
Oven
•
•Indicator lights for power and heating
Cleaning and Ser vicing
•All models with easy clean stainless steel external finish
•Plate is finished front and rear with overlap construction to remove cleaning traps
•Control service and gas conversion through front of unit
•Burner service requires plate removal
•Removable oven racking and sole plate
•Easy clean vitreous enamel oven and door inner
•Door hinge spring adjustable on unit (door outer removed)
•Door disengages for lift off removal and increased service access
•Access to all parts from front of unit