Russell Hobbs RHEC1 Installation, Environment where the appliance is to be installed

Page 7

Installation

Electric oven and hobs must be connected to an electrical cooker powerpoint - consult a qualified electrician. Products must be installed in accordance with the manufacturer's safety recommendations, in accordance to the instructions in this guide and in compliance with the current regulations. Failure to do so will void the manufacturer’s guarantee.

Before connecting your appliance to the mains at home, make sure to check the conformity of the voltage settings. These are specified on the information sticker attached to the appliance and/or packaging, with the usage conditions.

The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)

After removing the packaging material from the appliance and its accessories, ensure that the hob is not damaged. If you suspect any damage, do not use the appliance and contact an authorised service personal, qualified electrician or Product Care, (0845 208 8750), immediately.

Environment where the appliance is to be installed

To install the cooker correctly, the following precautions must be taken:

The appliance can be installed directly next to kitchen/furniture units/cabinets that are not higher or taller than the top of the cooker’s hob.

If the Kitchen units/cabinets that will be next to the cooker are higher or taller than the cooker, then they must be at least 200mm from edge of cooker’s hob.

If a cooker hood is installed above the cooker, it must be a minimum distance of 650mm above the top of the cooker. The hood itself must be installed in accordance to the instructions/requirements of the cooker hood.

Wall cabinets that are adjacent to a cooker hood must be a minimum distance of

420mm from the cooker’s hob.

If the cooker is installed beneath a wall cabinet, then the wall cabinet must be at least a minimum distance of 700mm away from the cooker’s hob.

The cut-out or space required for the cooker is shown in the below image.

7

Image 7
Contents Single Cavity Electric Cooker Contents Safety Instructions Safety Instructions Before using the appliance List of components Environment where the appliance is to be installed InstallationInstallation of the appliance General warnings and measures Adjustment of the feetInstallation Keep warm How to useControl panel Hotplates OffHow to use Oven & Grill Upper heating element function Lower heating element functionGrill function Important note Maximum setting of the thermostat is 190CUpper heating element and grill function Energy saving Mechanical timerOven accessories Oven tray Wire grid Grill pan & handle set Accessories used in the oven Changing the oven lamp MaintenanceHotplate cleaning Oven cleaningTrouble shooting Transportation RHEC1 SpecificationSpare part Spare partsRevision

RHEC1 specifications

The Russell Hobbs RHEC1 is a cutting-edge electric kettle designed to enhance your tea and coffee brewing experience. Combining a sleek aesthetic with innovative technology, this kettle stands out in any kitchen setting. One of its most notable features is its rapid boil technology, which allows for faster heating of water compared to traditional kettles. In just a few minutes, you can have boiling water ready for your favorite beverages, making it an ideal choice for busy households.

A standout characteristic of the RHEC1 is its generous 1.7-liter capacity, which is perfect for serving multiple cups at once. Whether you're entertaining guests or preparing a large family meal, this kettle ensures that you have enough hot water to meet your needs. Additionally, the kettle features a 360-degree cordless design, which enhances convenience and allows for easy pouring from any angle.

Safety is a priority with the Russell Hobbs RHEC1. It is equipped with an automatic shut-off feature that engages once the water reaches boiling point, preventing overheating and ensuring that the kettle operates safely. The built-in boil-dry protection further adds to the safety measures by preventing the kettle from functioning without water.

In terms of design, the RHEC1 boasts a modern, stylish exterior made from high-quality stainless steel, which not only ensures durability but also makes cleaning effortless. The kettle's water level indicator allows you to easily monitor the amount of water inside, making it easy to fill to the desired level.

The RHEC1 also offers an easy-to-use lid that can be opened with just a push of a button. This feature allows for hassle-free filling and minimizes spills during use. Additionally, the kettle comes with a removable filter to trap impurities, ensuring that every cup of tea or coffee is brewed to perfection.

Overall, the Russell Hobbs RHEC1 is a blend of functionality and style. Its combination of rapid boiling capabilities, user-friendly features, and safety technologies makes it an excellent choice for anyone looking to elevate their beverage preparation. Whether you’re a tea enthusiast or a coffee lover, this kettle will undoubtedly make your daily routine simpler and more enjoyable.