Installation

•Products must be installed in accordance with the manufacturer's safety recommendations. Failure to do so will void the manufacturer’s guarantee.

•Before connecting your appliance to the mains at home, make sure to check the conformity of the voltage settings. These are specified on the information sticker attached to the appliance and/or packaging, with the usage conditions.

•The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)

When installing your machine

•After removing the packaging material from the appliance and its accessories, ensure that the dishwasher is not damaged. If you suspect any damage, do not use the appliance and contact an authorised service personal, qualified electrician or Product Care, (0845 208 8750), immediately.

•Ensure you choose a suitable, safe and level place to install your machine.

•We recommend this machine be installed by a qualified engineer.

•Only original spare parts should be used with this machine.

•Before installing, ensure the machine is unplugged.

•All electrical values must match the values indicated on the rating plate.

•Ensure the machine does not stand on the electricity supply cable.

•Never use an extension cable or multiple power point cable when using the appliance.

Note

Before using the machine, run a full cycle with the machine empty

Location of the Dishwasher

•When determining the place to put your machine, ensure there is sufficient room to fully open the dishwasher door.

•Do not install the machine where the room temperature is likely to drop below 0°C.

•Before positioning, remove the machine from its packaging taking care to follow warning instructions attached.

•Position the machine close to a water tap or drain.

•When moving the machine ensure you do not grip the door or panel.

•Ensure there is sufficient room around the machine to allow it to be moved for cleaning purposes.

•Ensure that the water inlet hose does not become compressed while positioning the machine. Also, make sure that the machine does not stand on the electrical cable.

•Ensure the machine is level when placed on the floor. Adjust the feet by turning them clockwise to raise the height of the machine, and anti-clockwise to reduce the height of the machine. Failure to ensure the machine is level may result in the door not closing properly and the machine to sway (this is not recommended and will void the guarantee).

RHDW1 (B) (S) (G) specifications

The Russell Hobbs RHDW1 (B) (S) (G) is an innovative compact dishwasher designed to simplify dishwashing for those with limited space. This model is particularly attractive for small kitchens, apartments, and even RVs, offering all the essential features typically found in larger machines but in a more space-efficient format.

One of the standout characteristics of the RHDW1 is its compact design, which allows it to fit comfortably on countertops. Measuring a mere 55 cm in width, it can easily accommodate the needs of a small household while still boasting a sizeable interior. Despite its compact nature, it can clean up to 6 place settings, making it an efficient option for singles or couples.

Efficiency is a key feature of this model, as it is designed to minimize water and energy consumption. With an energy rating of A+, users can feel confident that they are investing in an environmentally-friendly appliance. The dishwasher uses only a fraction of the water compared to traditional hand washing, making it both cost-effective and sustainable.

Equipped with multiple wash programs, the RHDW1 offers great versatility. Users can choose from a variety of settings, including Eco, Quick, and Intensive cycles. The Quick cycle is particularly beneficial for those on the go, providing a thorough clean in just 30 minutes.

Technologically, the RHDW1 incorporates a digital control panel that is user-friendly and intuitive. The LED display allows for easy monitoring of the wash cycles, ensuring users are always informed about their dishwashing progress.

The internal layout is designed for maximum efficiency, with adjustable racks and a cutlery basket that allows flexible loading. This means users can optimize the space to accommodate larger pots and pans without hassle.

The RHDW1 also features a delay start function, allowing users to set the dishwasher to start at a more convenient time. This is ideal for those who wish to take advantage of off-peak energy tariffs or who want to run the machine while they are away from home.

In summary, the Russell Hobbs RHDW1 (B) (S) (G) is a stylish, efficient, and convenient dishwasher that meets the demands of modern living. With its compact size, low energy consumption, and multiple wash options, it stands out as a practical solution for small spaces without compromising on performance.