SETTINGS ____________________________________________________________________________________
ST
F M 8 7 . 5 0MHz
FLAT
ST
F M 9 6 . 5 0MHz
FLAT
STMEMORY
F M 8 7 . 5 0MHz
FLAT
RDS
ST
F A N T A S Y
FLAT
... using a manual search
1Press »TUNER « to switch on the device.
– Display: the waveband (» FM « or » MW«) and the frequency.
2Select the frequency band (FM or MW) by pressing the »TUNER BAND« button.
3 Press » 5a « or » | s6« to tune to the required station. Hold down |
» 5a « or » s6« to start a search for the next radio station, or briefly press » 5a « or » s6« to change the frequency in small steps.
4Tune to the station you want and then briefly press »PROGRAM AUTO PRESET« on the remote control.
Display: »MEMORY« flashes along with the frequency of the station.
5Select the preset position using »1...0, +10« on the remote control.
6Press »PROGRAM AUTO PRESET« on the remote control to store the station.
Display: the waveband and the frequency, followed by the station name.
7To store more stations repeat steps 3 to 6.
Note:
If a station transmits RDS information, the stereo system will store its name.
– Display: for example »F M 9 5 . 7 0 «, followed by the station name.
Deleting settings
This function enables you to delete all the stored settings.
1With the device on, press the »RESET« button on the bottom of the device using an implement such as a paper clip.
ENGLISH
15