Panasonic NN-SD372S warranty Quick Min feature, To set cooking time, Press Power level

selecting Power & cook time

example: to cook at P 6 (MediuM) power for 1 minute 30 seconds

1.	• Press Power level
	until the desired
	power level appears
Press 5 times	in the display window.

2.• Set Cooking Time to 1 minute and 30 seconds

using Time Select Dial.

3.• Press start.

		Cooking will start.
		The time in the
		display window will
		count down.
Press		Power Level
once	P10 (HIGH)
twice	P9
3 times	P8
4 times	P7	(MED-HIGH)
5 times	P6	(MEDIUM)
6 times	P5
7 times	P4
8 times	P3	(MED-LOW)/DEFROST
9 times	P2
10 times	P1	(LOW)

notes:

1.For more than one stage cooking, repeat steps 1 and 2 for each stage of cooking before pressing start Button. The maxi- mum number of stages for cooking is 3. When operating, two beeps will sound between each stage. Five beeps will sound at the end of the entire sequence.

2.When selecting P10 (HIGH) power for the first stage, you may begin at step 2.

3.When selecting P10 (HIGH) power, the maximum programmable time is 30 min- utes. For other power levels, the maxi- mum time is 1 hour and 30 minutes.

4.For reheating, use P10 (HIGH) for liq- uids, P7 (MED-HIGH) for most foods and P6 (MEDIUM) for dense foods.

5.For defrosting, use P3 (MED-LOW).

do not over cooK. This oven requires less time to cook than an older unit. Over cooking will cause food to dry out and may cause a fire. A microwave oven’s cooking power tells you the amount of microwave power available for cooking.

Quick Min feature

This feature allows you to set or add cooking time in 1 minute increments up to 10 minutes.

to set cooking time:

1.• Press Quick Min until the desired cooking time (up to 10 min-

utes) appears in the display window. Power Level is pre-set at P10.

2.• Press start.

Cooking begins and the time will count down. At the end of cooking, 5 beeps sound.

notes:

1.If desired, you can use other power levels. Select desired power level before setting cooking time.

2.After setting the time by Quick Min Button, you can not use Time Dial.

3.Quick Min Button can be used to add more time during manual cooking.

Keep Warm feature

This feature will keep food warm for up to 30 minutes after cooking.

example: to keep 2 cups of gravy warm for 10 minutes.

1. • Press Keep Warm.

2.• Set warming time using Time Select Dial, up to 30 minutes.

3.• Press start.

Keep Warm will

start. The time in the display window will count down.

note:

Keep Warm can be programmed as the final stage after cook time/s have been manually entered. It cannot be used in combination with auto features.

12