Technical data sheet for
TARGET TOP GAS STATIC
OVEN RANGE 900mm
RN8110G
Matched modular height machined top for seamless work surface
High output dual ring cast iron burner GN 2/1 gas static oven
Drop down door Stainless steel exterior Easy clean
Easy service Fully modular
Overall Construction
•Galvanized steel chassis
•Welded hob surround with 1.5mm 304 stainless steel bull nose
•Splashback and hob sides 1.2mm 304 stainless steel
•Front panels and oven sides 0.9mm 304 stainless steel
•150mm legs in 63mm dia.
Target top
•3 piece
•Top plates and removable centre with integral spill protection design
•Cast top reinforced with integral heat fins for heat zone definition
•45MJ dual ring cast iron burner with single control
•Full pilot and flame failure protection
•50mm thick refractory brick lined burner box for high heat retention
•2 vitreous enamelled spill trays
•Supplied with
Oven
•Fully welded and vitreous enamelled oven liner
•GN 2/1 capacity with 4 position racking
•
•Cast iron even heat oven sole plate
•30MJ oven burner
•Pilot and flame failure with piezo ignition
•Welded frame drop down door with
•0.9mm 304 stainless steel door outer
•1.0mm press formed vitreous enamelled door inner
•High density fibreglass insulated
•Stay cool stainless steel door handle with cast metal handle mounts
•Supplied with two chrome wire oven racks
Controls
•Large easy use control knobs - heat resistant reinforced
•Easy view control settings on knobs
Target top
•Variable high to low burner control
•Single control knob for burner and pilot system
•Flame failure pilot burner
•Manual pilot ignition for reliable operation
Oven
•
•Piezo ignition to pilot burner
•Flame failure
Cleaning and Ser vicing
•Removable oven racking and sole plate
•Easy clean vitreous enamel oven and door inner
•Easy clean stainless steel exterior
•Target Top fully serviceable from front of unit
•Bottom sill removable for burner and pilot access
•Door hinge spring adjustable on unit (door outer removed)
•Door disengages for lift off removal and increased service access
•All parts front accessible from installed position