Sanyo EM-S8597V owner manual HOW to SET the Oven Controls, Single Digits to Represent Power Level

HOW TO SET THE OVEN CONTROLS

Each time a button is touched, a beep will sound to acknowledge the touch.

	2	20%
SETTING THE CLOCK	1	10%
To enter the oven clock time,

1.Touch CLOCK button.

2.Touch CANCEL button.

3.Use the number pads to enter time. You must touch at least 3 numbers to set the clock (one for hour, and two for minutes).

4.Touch CLOCK button again to confirm.

This is a 12-hour clock. Default setting is 1:01 when the oven is plugged in.

You can check the clock time when cooking is in progress by touching the CLOCK button.

SETTING COOKING TIME AND POWER

1.Touch TIME pad.

2.Use the number pads to set a cooking time.

You can set a cooking time from one second to 99 minutes and 99 seconds. If you are setting time greater than one minute, you must enter numbers for both minutes and seconds. For example, to set 20 minutes, enter 2,0,0,0.

If you want to set a power level other than 100% power, touch POWER,

Use the number pads to enter the power level. You can set the power level from 1 to 9. (Please check the following table).

Touch START to start cooking.

You can skip steps 3-4 if you are to cook with full power.

********SINGLE DIGITS TO REPRESENT POWER LEVEL*********

Press Number pad	Power Level
9	90% of total
8	80%
7	70%
6	60%
5	50%
4	40%
3	30%

MULTI-STAGE COOKING

Some recipes may require setting a multi- stage program involving defrosting, and different power levels. The following example shows the steps in setting up such a program.

1.Touch CANCEL button to reset the system.

2.Input jet-defrost program.

3.Touch MEMORY button.

4.Input microwave-cooking program.

5.Touch MEMORY button again

6.Input another microwave cooking program with probably lower power level settings.

7.Touch START button.

NOTE

Logically, JET DEFROST or WEIGHT DEFROST must proceed any cooking function in a multistage cooking program.

The respective lights will come on to indicate which stage the oven is operating in. After total time has elapsed, 3 beep sound.

PRE-SET COOKING

You can put food in the oven, and program the oven to start up in a later time within the oven's clock cycle (12 hours).

Suppose you want to set the oven to start-up at 2 o'clock.

1.Place food in the oven

2.Touch PRE-SET button.

3.Touch number buttons 2,0,0.

4.Set a cooking program.

5.Touch START button.

7